help with clutch!!!!!

[gotballs 250r 82]

Went riding yesterday and when i started rippin down the trail i felt the clutch slipping. So i adjusted the cable and the other adjust spot on the motor still no luck. It got worse soon the bike just stopped would not move. what does this sound like to you .I think it is the clutch plates. But their was not much warning of it going out it rode strong last time out. Does this sound normel to you the clutch going from riding slipping to not able to move the bike with no rider on it.And when bike is off and in gear you can push the bike almost like it is in neutral.:TrikesOwn

[gotballs 250r 82]

anybody??????

[gotballs 250r 82]

loven the replys

[factoryX]

I don't know anything about a clutch on a early model 250r, why don't you search it in the search box. My father thinks you burnt the clutch out being that the bike is 24 years old and has the original clutch in it.

[1upfront]

Are you leaving enough free play on the clutch lever? If not this could be a symptom but chances are you'll need to replace your clutch plates if it's gotten this bad.

[factoryX]

http://cgi.ebay.com/ebaymotors/HONDA-81-84-ATC-250R-Clutch-Springs-VESRAH-ATC250R_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1 116QQitemZ250262485149

here are clutch springs

http://cgi.ebay.com/ebaymotors/HONDA-81-84-ATC-250R-Clutch-Plate-Set-VESRAH_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c39Q 3a1Q7c66Q3a2Q7c65Q3a12Q7c240Q3a1318QQ_trksidZp3286 Q2ec0Q2em14QQhashZitem270267232252QQitemZ270267232 252

and clutch plates.

[gotballs 250r 82]

Thanks for the replys the clutch is not the original clutch it about 2 yr old barnett

[factoryX]

fine then how much do you weigh? the bike was meant for a 175-210lb rider.

[gotballs 250r 82]

im 200lbs and i did not just get this bike i had the bike 20 yr and it is 300r big bore...

[SWIGIN]

once barnett clutchs slip they will not come back.... so that sounds about right to me.

go with factory plates and barnett springs

oh....and dont beg for resopnces, it was only a few hours

[gotballs 250r 82]

Thanks for the info i was not begging for responses i was asking for answers..

[honda_atc200es]

Thanks for the info i was not begging for responses i was asking for answers..

yes, but still, sometimes not everyone knows the answers, patience is key =], double posting like that just turns away most of our 3ww veterans (in the sense of experience not age ;) )