got a ?crazy? idea

[code200k]

ok so i started to tear down my 200k to rebuild it over the winter and after i pulled the motor out i decide to take a break and go on craigslist then i noticed that there is alot blaster motors on my c.l for around 200-300 bucks so i got to thinking if i could be able to put a blaster motor in my frame.and if so how hard would it be i took a quick look at a blaster for sale and it seems that it should fit i mean that the pipe comes out on the right side and the motor are about the same size..any ideas or what ever let me know

[WIkid500]

It's been done before I think. It would be a sweet deal, a ytm with a manual clutch. Still don't have rear susp. though. I know and IT490 2 stroke will fit an a blaster frame....Same mounts and all. That's a cool project!

[code200k]

soo what your saying is that it should work with lil modifing?sweet

[WIkid500]

I would have to think so. If anything the blaster motor should be smaller in the gear case due to the manual tranny. I don't know how tall it is in comparison though.

[code200k]

ok im gunna get the blaster specs from my freind blaster i hope it works out.

[TriMotoMan]

iv'e been thinkin about putting a blaster engine in a yt im pretty sure they have the same mounts

[brapp]

i put a blaster motor in a beat up klt110 i had back in the late 90's

[code200k]

haha cool im goning to start my search for my blaster engine and hopefully have her back together before the snow starts:naughty:

[Dirtcrasher]

I have 2 near complete Blaster motors in pieces. All cleaned spotless.... Was looking to get 100$ for all of it, you will need a cylinder but that should be it....

[code200k]

hmmmmmmmm i think the shiping would be a lil to much for me

[Tri-Z Pilot]

im thinkin you might have trouble with the exaust outlet and the down tube on the frame, and expansion chamber fitment. you will probably need a custom pipe, but other than that though the blaster motor is fairly compact, easy to work on, got decent stock power, and a huge market of motor hop ups. throw in a 240, a decnt pipe, 34mm flatside, and some porting and you should be able to spank banshees and 400ex's. trenga racing was a great place for this, but i dont know if their around anymore.

[code200k]

i think thats the only prob i will ahve with it nd for right now imma kepp it stock

[code200k]

ok sooo while waiting to find a blaster motor i fig i would put a new top end on the stock engine..just wondering if anybody had any input on wheater to put stock or bored over pistons in it??

[WIkid500]

Just bore it out until the cylinder cleans up. Get a Wiseco piston I think they go 10:1 compression. That will give you a bump in power too.

[code200k]

i think thats wat im gunna do like the smallest size over just to clean it up

[code200k]

its been a slow rerbould still havent found a blaster engine but i did just paint the frame today and im thinking bout doing all black plastics but for right now im just gunna put new pistons and rings and ride her

[jeffatc250r]

hmmmmmmmm i think the shiping would be a lil to much for me

Your one freakin state over! A hundred bucks is a GIFT

[code200k]

yea i know the price was great but i had my dad git my a shipping quote and he said 350 thats why maybe he just dint want me having more crap:wondering

[Charles Ford]

hey I'm getting a rolling blaster with out the motor this week and would to stuff a YZ 490 into it for mudding and climbing some hills. has anyone rode one or know of anyone with some parts like a YZ 490 motor,exhaust,carb, air box.?? I built my dream bike it was a 400ex frame with a XR-650L motor stuffed into it. I called it my ( TRX650EX KONG ) so I don't think this will be bad as I did that one for around $800.00 and it was going good until I rode a raptor 660. let me know if you can help. charliekat@oh.rr.com

my 98 grizzly 4x4 lost spark and need some help with that like a manual, stator, coil, cdi box ,??

Thanks Chas