rocketheading
09-03-2008, 03:18 PM
The bolt on the Right side that is for the chain adjustment, the spot welded nut broke off. What should I do about that? I need instructions on how to get to that nut that is on the inside.
I have removed the 2 large nuts, removed the 6 or so bolts on the black cover that covers the brake drum. I loosened the brake cables, but can't get the black cover to slide to the R very far. Just enough to see the brake drum. What do I need to do next? I did not take the rear wheel off yet.
What is the best way to fix this problem? Get the nut welded back on, or is there other options? Thanks Tom
I have removed the 2 large nuts, removed the 6 or so bolts on the black cover that covers the brake drum. I loosened the brake cables, but can't get the black cover to slide to the R very far. Just enough to see the brake drum. What do I need to do next? I did not take the rear wheel off yet.
What is the best way to fix this problem? Get the nut welded back on, or is there other options? Thanks Tom