PDA

View Full Version : honda 125 hi/low replacement question



oscarmayer
08-20-2008, 07:09 PM
there's a local kid here that wants me to fix his 125. his chain poped off and he said it broke a box that bolts to the side that has his hi/low gearing. I have not seen the trike yet, but was wondering is it easy to replace and whom here has spare parts they can sell me?

He's going to give me a 200s (motor in prices due to needing a rebuild and he didn't know how to do it) in exchange for doing the labor and him buying the parts.

attached are some photos of the broken part(s)
again I'm wanting to BUY the parts needed to fix this ATC.

oscarmayer
08-20-2008, 10:43 PM
ok i purchased the gears and hi/low setup from online.
now, i need the sub trans case. the subtransmission cover or case that is in the first pic. if you look closley, it has part of it broken away.

that or a complete bottom end. :)

rdlsz24
08-22-2008, 11:19 AM
You're going to need a new or used side cover spacer (#1 on this pic (http://www.bikebandit.com/assets/schematics/Honda/H00450021.gif)) since the round hole that holds the shift part that goes back and forth is broken. I bought a used one recently on eBay for cheap. Just have to keep an eye out since there doesn't seem to be a ton of 125m parts on there.

Rob

oscarmayer
08-22-2008, 07:19 PM
it's the left side cover?

oscarmayer
08-22-2008, 07:38 PM
i just ordered from a canadian dude. can't find any here in the states. looks like the artic north is the place to find honda atc parts.

http://merrittmotorcyclesalvage.com/