Neutral safety switch

[feedrate]

Hi there,its my first time in this forum and I have an issue that's driving me nuts.My 200es won't turn over in the neutral pos.I have the green light,trike is in neutral,battery has juice.I've been jumping it with wire from the battery to the starter but this is pain.All the wires look good checked out starter switch,connections just above the trans everything looks cool.Anyboby have an idea?If I follow the wire down its leads behind the trans.Do I have to go in there?Thanks

[SWIGIN]

unhook the wire from the switch and i beleive you then need to ground that wire to bypass the switch

i would try it with out grounding first, then just hold it against bare metal

[hublake]

I know there are a couple of in line fuses back by the battery on my 83 200e, check them.

[atctim]

check the solenoid by jumping it with a screw driver across both terminals.

[350x'inNY]

He says he has the green light on, so that means the neutral switch is doing it's job. I'd follow "the juice" with a voltmeter and find where you lose it. I've had insects go up in the start switch and nest before, thus not making contact too.