Tightening chain on 200S?

[WaimakRydah]

How would i go about tightening the chain on my 200S

[threewheelin-feelin]

there is four bolts that hold the rear axel and hubs to the frame...loosen them and then tighten the little adjuster that is at the bottom left side its real easy

[WaimakRydah]

Im not 100% sure of what u mean. Would u be able to get some pics and highlight what bolts il need to adjust

[Erics350x]

you need to download a manual or earn enough $ to pay a mechanic

[threewheelin-feelin]

get behind the 200s right by the muffler...look for where the rear axel assembly mounts to the frame...there are for i believe 17 mm bolts you will loosing...then tightind the adjuster to the bottom left hand side

[WaimakRydah]

i still dont see what the point in loosening the axle bolts is there is 2 on each side right? Why should I loosen the ones on the opposite side to the chain?

[TravEX]

Because the whole carrier moves when you turn the 12mm adjusting nut. Don't bite the hand that feeds ya, we try to help and get nothing but flack from ya. Your name isn't James is it?