200 x kicker

[SCEADU]

Will the kicker form 83-85 work on th 86-87?

Is there a way to fix one when the retention spring is worn out and flopping around.

[RedRider_AK]

I know that a TRX300 kicker will fit on the 86-87's, as I have done it myself. Not sure about your question, but if you have a worn out 86-87 there's a LOT of TRX300's around. And they are a direct bolt-on.

[Dirtcrasher]

The TRX300 kicker DOES NOT fit the 86 200X. It may fit the later model runs and does fit the 87 all of which have a larger shaft.

All 7 of the 86 motors that I have use the smaller shaft, about 15 to 16mm.

Only the 87 motor I got from RR_AK can use the TRX300 kicker.

Seabass already got screwed by buying a TRX kicker which didn't work for his 86.

EDIT - Also, both smaller and larger diameter kickers are available from Honda for about 87$. I have a few of each......

[SeaBass8]

Luckily the TRX300 kicker was only 10 bucks but that is correct it didnt fit my 86.

The 86 kicker do come up on feeBay. Usually run 50 -70 bucks depending on demand. Or get a new one from Service Honda.

SeaBass8

[Itrike]

Hey SeaBass8 if you still have that kicker I'll buy it from you I have an 87 200x and needs a good kicker (that is if you want to sell it)

[SeaBass8]

SCEADU - An 86 kicker just came up on feeBey... Someone reading this thread perhaps???

Itrike - I'll prolly just keep my TRX kicker in case I come across an 87 motor. But they are plentiful on feebay. So you shouldnt have to much trouble finding one. Im not even sure if the one I have fits the 87.

SeaBass8

[Itrike]

Ok looks like I need to do some reserch I know a guy that has a 300ex if I can get in touch with him maybe I can try his to see if it works.