350x swing-arm & axle removal

[AJZ_200X]

I am in need of some help with removing my axle from the swing-arm. What is the process or steps that i need to take in order for the axle to seperate from the swing-arm? I can not seem to get the sprocket hub off the left side and the large nut on the right side loose. I searched to see if there was a topic on axle removal, but i did not find anything. Any kind of help is appreciated. Thanks.

[andnuaa]

Hope this picture can help you out follow it one through five

http://heavyequipmentsales.net/andrew/atc/web350x%202.jpg

[AJZ_200X]

Thank you! got it taken apart in five minutes!

[tanks350x]

I was dumbfounded also when I did mine for the first time, then Dirtcrasher helped me out alot. just like this person helped you

[AJZ_200X]

to get the carrier out of the axle, I just have to remove the two allen bolts and lightly tap it out, correct? I got this far, then simply gave up:crazy: Thanks.

[Erics350x]

yes, and remove the caliper mount thats held on by a large snap ring

[AJZ_200X]

thanks for the help:Bounce