PDA

View Full Version : Broken 110 frame piece....weld or new frame?? PIC


kilabeez0
06-08-2003, 08:31 PM
This is like a pipe that the plastic sits on. One end broke off and I tried JB Weld but it didn't work. Should I just get a new frame or try and weld a pipe onto it?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=43981&item=2418755457

http://www.imagestation.com/picture/sraid65/pd9b255557037a720125f76af375acbf9/fbf8fa13.jpg

Also, these pipe things are too thin, so some kind of larger pipe fits over them so the hooks on the plastic fit snug. Any idea what they are or can someone provide a pic for me?
Howdy
06-08-2003, 08:59 PM
I would say you could weld a replacement in there.

Howdy
KASEY
06-08-2003, 09:08 PM
how about drilling it out and putting a rod all the way through both sides then tack weld it in,,,,,it would be stronger that way,,,,,,
Howdy
06-08-2003, 10:08 PM
how about drilling it out and putting a rod all the way through both sides then tack weld it in,,,,,it would be stronger that way,,,,,,

Actually that is how it was made originally. ;)

Howdy
FullBore
06-09-2003, 06:13 PM
Mine has a Bolt all they way through with just those spacers on the ends, those look like they are attached but are just pushed into the frame when the bolt is tightened, are you sure its snapped off or just come out?

Nat
kilabeez0
06-09-2003, 09:56 PM
i'm pretty sure it snapped off. do u think u could take a picture for me. and if i had to drill it out wouldn't that be a trailprotrailprotrailprotrailprotrailpro since it's so large? would a standard drill be up to par?
FullBore
06-13-2003, 07:48 AM
Photos and my half-a-grab bar!

http://gopeds.hypermart.net/images/new_images/grab%201.JPG

http://gopeds.hypermart.net/images/new_images/grab2.jpg

http://gopeds.hypermart.net/images/new_images/grab3.jpg

The rubber covers are ignition terminal covers that I fitted to stop the seat from rattling.

And just check out the flex on my mower!

http://gopeds.hypermart.net/images/new_images/mower%20Flex.JPG

Nat
kilabeez0
06-13-2003, 09:14 PM
o wow, so it really is an actual bolt with a threaded end on one side and a nut to hold the spacers on? I thought it was just a pipe. Go figure. Thanks alot for the pictures!!!
FullBore
06-15-2003, 05:09 PM
yeah, the bolt is there to hold your grab bar on!.

Nat