where to get press in pilot jets?

[Pete]

basically the title says it all. I need a #35 Keihin press in pilot jet for the OEM carb on my ATC 110. Does ANYONE make them or have one? I tried DrATV site and they are not available on there...

[super90]

Im sure any good honda dealer could get them, Or you could find one for a 110cc lifan engine that would work.

[Dirtcrasher]

IDK.... Even the infamous pressed in "cold start" SX jet couldn't be found at my dealer. I figured I'd make my own on the lathe....

[200x Basket]

why not drill out the one that is in there?

[Billy Golightly]

Probably needs to be smaller...I've honestly never heard of anyone carrying those. Sudco MIGHT have them, if they don't, then they will probably need to be made.

[300rman]

try CARBPARTS.COM and look up the keihin model your lookin for.

if you cant find it online, CALL THEM and ask. they are a phone order company anyways. just have the model of the carb handy to tell them. maybe someone here can tell you what model keihin you got? it should say on the carb as well, i believe.

[Pete]

why not drill out the one that is in there?

I did, but my bit must have been a bit larger and now its too rich. I'll try calling CPW in Cleveland and see if they have anything.

[300rman]

well, did they have your part?