Let's see the 200x's

[2hundredx]

Let's see some :pics: of everyones' 200x's.

[masonryman13]

Still waitin on the exhaust. Its an 85, and near mint;)

[white rat]

Here's my lump, needs just about everything.

[super90]

First 2 are the day I got it (bought it for $200 bucks!) 2nd are current with some custom parts and built how I wanted it.

[drhatc200]

mines in my avatar 10.5 20 over weisco new vlaves and guides dg exhaust new moose handlebars new oury grips new clutch cable painted frame. gotta get clutch slipping in high gear when hard on it needs front tire as well. and yes those are trail pros lol the time ive had in mud thay have done good.

[TwoHundredEx]

Heres mine:

[bp739]

http://i17.photobucket.com/albums/b72/bp739/DCP00377-2.jpg

[super90]

BP, did you get that blue chain off ebay? I was thinking about getting one but how do they hold up compared to a did gold o-ring? My did has held up for 2 years now.

[Jim mac]

the latest project. used and abused, but it runs, shifts, stops, and the light even works jim

[84honda200s]

not my most up to date pic. but it will work for now.

[SCEADU]

My "Pro-Link" X



http://i290.photobucket.com/albums/ll272/_SCEADU_/P4050207.jpg

[MADATC]

Here are my twins.

63419

63420

[stealthduner]

Here is my 85. It is about a month old picture. It now has a freshly painted tank, shorty Levers, new headlight shell and chrome guard, and Blue Fork boots. I just rebuilt it with new opiston and rings, Clutch, kick start upgrade kit, new Maier plastics and a Custom Fabbed White Brothers R4 from a KFX400

http://i59.photobucket.com/albums/g307/stealthduner/85%20200X/1pipeside.jpg
http://i59.photobucket.com/albums/g307/stealthduner/85%20200X/1side.jpg
http://i59.photobucket.com/albums/g307/stealthduner/85%20200X/WhiteBros.jpg

[super90]

what all did you have to do to make the WB pipe work? I used a 400ex pro circuit pipe on mine, I think there similar. Hows it sound?

[stealthduner]

what all did you have to do to make the WB pipe work? I used a 400ex pro circuit pipe on mine, I think there similar. Hows it sound?

I actually have a few pictures of it. Basically I had half a headpipe that i cut the elbow off the front (that goes in head) and welded it to the end of the headpipe. On the silencer I mostly cut off almost all the inlet pipe and made it a strait shot. The headpipe is still a tad smaller, but with some exhaust sealant it works fine. If i ever fix it I will taper down the inlet on the silencer a bit to make a tighter seal.

OH! and it sounds awesome, it is throaty and still relativley quiet. It is only a tad louder than my 250SX with its stock exhaust. I have never ridden a 200x with a stock pipe (heck this is the only one i have ridden) so i couldn't tell you of any performance notices

Headpipe MOD
http://i59.photobucket.com/albums/g307/stealthduner/85%20200X/Headpipeextension.jpg
JOINT
http://i59.photobucket.com/albums/g307/stealthduner/85%20200X/modarea.jpg
http://i59.photobucket.com/albums/g307/stealthduner/85%20200X/tailpipemod.jpg

[bp739]

BP, did you get that blue chain off ebay? I was thinking about getting one but how do they hold up compared to a did gold o-ring? My did has held up for 2 years now.

Yep, I did get it from ebay, I have them on my 200x and the 350x, but I really could'nt tell you how they hold up because I have'nt ridden with them that much. They seem like a decent o-ring chain, and the price is definitely right compared to other colored chains.

[dansvan]

Here's mine.

http://www.supermotors.net/getfile/618331/fullsize/p1010128.jpg

http://www.supermotors.net/getfile/618330/fullsize/p1010129.jpg

http://www.supermotors.net/getfile/618322/fullsize/p1010137.jpg

[ATV4life1]

Latest addition to my collection.

[3Wheelers4Life]

well, heres my 84 200X. it currently sits with the engine pulled out (sucked a valve in late sept 07 and been down ever since) :(. plans are:

-rebuilt crank (vesrah con rod, honda bearings, new sprocket)
-performance cam
-wiseco 65.5mm 10.25:1 piston
-R&D valve springs
-DG Krome rcm exhaust
-K&N air filter
-XR200 carb (26mm)
-XR200 intake manifold
-New honda head & parts in head
-new bearings all over
-frame up resto
-maybe some polishing
-some more stuff i cant think of right now
-and of course little odds and ends.

does anyone know what kind of headlight guard that is on my X? its not a hondaline one.