PDA

View Full Version : 250sx Fender Question


LFD250sx
03-31-2008, 03:39 PM
On my 250SX the rear fender never stays lached i dont kno why u line the seat up and every thing push it down and as u ride it slides off this has caused a hole in the one side of the fender. how do i stop this from happening? :confused:



:confused:
lndy650
03-31-2008, 03:51 PM
check where it latches and see if the metal has a groove wore in it
the great gazoo
03-31-2008, 03:52 PM
Check the spring on the latch & make sure BOTH sides catch.
Big Lebowski
03-31-2008, 10:35 PM
Speaking of 250sx rear fenders. Does anybody make an aftermarket version that has the trunk?
atctim
04-01-2008, 09:01 AM
Speaking of 250sx rear fenders. Does anybody make an aftermarket version that has the trunk?

nope - maiers are the only company that makes an after-market rear fender for the SX - and they don't put that nice trunk box in it!
hublake
04-01-2008, 11:09 AM
nope - maiers are the only company that makes an after-market rear fender for the SX - and they don't put that nice trunk box in it!

Would it be possible to use a tool box and cover from an OEM fender and cut out the maier one where the tool box and cover go?
aproudcanadian
04-01-2008, 05:33 PM
maybe but it dont think it would be worth the time or effort
Dirtcrasher
04-01-2008, 07:05 PM
Would it be possible to use a tool box and cover from an OEM fender and cut out the maier one where the tool box and cover go?

Impossible..... The stock trunk sure is nice, but as years go by, they sag and become brittle and then crack.


LFD250sx

Your front bracket could be bent, the portion of the frame that they slide into, cracked or worn out. Then you have the rectangular rubbers (I think the SX has them) that need to be good and the round ones in the back too. As well as the latch.

It's no big mystery, either something is worn out or missing.
LFD250sx
04-04-2008, 09:18 PM
it made a hole on the one side thought the fender