PDA

View Full Version : Feel like a idiot, need your help!!!!


86250RZ
06-05-2003, 12:47 PM
I was pulling my stock cylinder to install my new LRD 300 Big Bore kit and after I removed stock cylinder a little bit of antifreeze got into the crank and rod area :oops: how do I get it out. If im right draining tranny will do no good because the rod and crank get there oil from your premix. Any help would be appreciated.
J.D.
06-05-2003, 12:58 PM
Just tip the motor upside down to get what you can out. The rest will burn off in the future.
86250RZ
06-05-2003, 01:15 PM
Thanx for reply, you dont think the steam from the heat and water building up pressure would cause any problems?
FullBore
06-05-2003, 02:37 PM
Thanx for reply, you dont think the steam from the heat and water building up pressure would cause any problems?

Seriously doubt it, if you are very worried get some 2 stroke fuel mix and wash it around in the crankcase then tip it out.

Nat
Mobular
06-05-2003, 02:45 PM
Without replacing the topend, drain the oil, and pour some fresh oil over the rod and crank. Let it drain, and for good measure do it again. You don't want to leave any antifreeze inside....and that stuff doen't evaporate........
FullBore
06-05-2003, 04:21 PM
once the engine is fired up it ain't gonna be there for long is it? lol like the end of the world on a crankcase, don't forget its a 2-stroke Mobular.

Nat
06-05-2003, 09:52 PM
fullbore you be stupid dawg why u be tellin the man dat wrong crap yo dats messed up..he be needin the stroker kit in that bit tehn it be goin fast
J.D.
06-05-2003, 10:02 PM
Dude, you're messed up.
Mobular
06-05-2003, 10:04 PM
I know it's a 2 stroke! I wouldn't want anti-freeze contaminating my bearings...but you may....have at it!
atc86r
06-06-2003, 09:28 AM
before i put my topend back on i stand mine up on end. then work the crank and spray wd 40 in there. it runs out hopefully cleaning anything out in there.
kyle
06-06-2003, 08:08 PM
Dude, you're messed up.


Yo goku, dont be dawgin on dat whiteboy man comawn na, let him be chillin like a villan yo, dats messed up homie. :D just kiddin!!!!
J.D.
06-06-2003, 08:29 PM
ok bruda I won't be mesiin wit dat negro no mo!!!! bro! ;)
plkmonster2
06-06-2003, 08:29 PM
white boy?? omg, u sound like a kid at my school.... scary...
kyle
06-06-2003, 09:28 PM
goku, yo my brudda uva nudda mudda.
yamaha200E
06-06-2003, 11:02 PM
lol :D