View Full Version : some performance tip
Big red 200es
03-05-2008, 06:19 PM
Hi, on my 125m the head have a porting and im thinking about putting a bigger carb now is 20mm.
I want to know with this long intake tube (number 22 in the picture). Do you lose some performance? If yes what to do with this?
And what will be a good carb size for it ?
(he will have a DG pipe, uni filter, porting, and a litle oversize)
Big red 200es
03-05-2008, 06:30 PM
The picture dont work sorry I will try again.
oOGoFastOo
03-05-2008, 09:24 PM
you shouldnt lose any performance with the long intake, it should add some, like a high rise performance intake on a car because it mixes the fuel and air better before intering the engine.
Big red 200es
03-05-2008, 11:05 PM
Ok so sorry for the dumb question:wondering
But do you know what a good size of carb will be good?
Erics350x
03-05-2008, 11:14 PM
you should be fine just changing your jetting in the stock carb
timmyhart14
03-05-2008, 11:39 PM
It will be perfectly fine with a bit longer intake, and for the size of the carb, I would try a carb that is about 2-4mm larger than stock and see how that works, ive seen alot of smaller carbs for ATVs and dirtbikes that would most likely fit a 125 3 wheeler just fine on Ebay, take a look
Big red 200es
03-06-2008, 08:51 AM
ok thanks for the answer
tbirdscott
03-06-2008, 11:53 PM
Longer intake will give you more top end horse power, shorter intake will give you more bottom end torque. Torque = Fun
Scott
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.