Case sealing....350x

[350Kris]

For some reason, I am having trouble getting the right side case (clutch side) to seal properly. I used a new OEM gasket, but I still have some pinhole leaks where oil squirts out. I always cleans the surfaces well, even to the point of using a Dremel tool and small wire wheel. Should I use some gasket maker in addition to the gasket??? Is there something else you guys use? Thanks.

Kris

[350Xrider]

Yes, I would recomend that you apply a light coat of gasket maker on both sides of the gasket and slap it on there. For some reason the clutch side of the 350X seems to be hard to seal for some reason or another. Good luck