Darn broke bolt on inner clutch hub

[triker111]

Earlier today i was replacing clutch plates, on my 1986 atc 250r and i over tightened one of the bolts and it broke off. Now i need a new inner hub, what years will work? Can i use one from a trx?? thanks in advance.

[Twilight]

go to Grabits site and order the largest one they have.

Works like a charm =)

[Jason Hall]

Most of the time the broken bolts will spinn right out with a sharp pick. There Is'nt alot of tension on the bolt because the head broke off. Try drilling the bolt In the center, then tap a small torx socket Into It and I bet It spinns out with your fingers.

[Dirtcrasher]

Most of the time the broken bolts will spinn right out with a sharp pick. There Is'nt alot of tension on the bolt because the head broke off. Try drilling the bolt In the center, then tap a small torx socket Into It and I bet It spinns out with your fingers.


Diddo..... Unless rust seized a bolt and that caused it to snap off, I can get out nearly all of them with just a pick or a left handed drill bit.

[evand]

yup left handed drill bit and i bet she comes out!

[SWIGIN]

i took it that he broke off one of the 5 fingers that the bolt goes into.