350x gasket kits??

[350xrider911]

i need help is there o-rings that go in, or around or around the guide valve. i know there, is a valve guide seal ,that goes on the top og the guide valve. can any one help

[Liquid-Darkness]

Just the valve guide seals go on the valve guide. There is an o-ring for each valve guide, but they go on when the valve guide is installed into the head.

[350xrider911]

can they ever go bad. i know valve guide seal go bad,and they cause it sot smoke when u first that it up. but i put new one in and it still does .is there a special way u have to put them on? all i did was press them on with my thumd, then press the valve through.

[Liquid-Darkness]

It sounds like you have alot of trouble with the engine smoking after you work on it. I would take it into the shop and have them go over it. That way you will be running on their work, and not yours.

[350xrider911]

ok i took my head off took the valves to,see if they were bent,my intake walve was alittle more then a thousant off and it caused my valve guide to were in one spot. i thank i found my proublem. should i put new valve guise in or will they be fine.

[Liquid-Darkness]

Yeah your local mechanic can probably fix any problem you have. Good luck.