tri zinger

[sean159]

where do you drill the holes in the exhaust to stop the carbon build up mine is clogged and some people say to drill holes but i do not know where thank you ,,sean

[TeamGeek6]

There is no such thing. Carbon in the exhaust is oil that didnt burn because the cylidner is too rich. Drilling holes just makes exhaust leaks and oil spooge leaking out of the pipe. When my R is set to around 30:1 or 40:1 oil, there is no exhaust smoke visible on idle. THATS clean. Its all about controlling fuel and improving the ignition.

Take the pipe off, knock off the big stuff and clean it with Easy Off oven cleaner and a wire brush. Might work to use a high pressure car wash to blow the junk out.

[Tri-Z Pilot]

No there actually is such a method for the tri-zinger, have you tried a search on it?

[sean159]

yes nothing that explains where to drill holes

[Tri-ZNate]

yes nothing that explains where to drill holes

dont they use 2 different sized exhaust gaskets? One is larger than the other, maybe they were refering to hogging out the stock gasket so it flowed better

[sean159]

no i have the bigger gasket