blaster eletrical probblems? Please help!

[Derek]

well heres the story i picked up a 1996 yamaha blaster yesterday the guy i bought it from said it needed a pickup coil in the stator. I had a extra 1993 blaster at my house for parts and it ran so i know the eletrical is good. i replaced the old stator with the one of of my 1993 parts blaster. I allso replaced all eletrical boxes with the ones off of my 1993 parts blaster eccept the TORS box. After that i put a spark tester on the ignition wire and it lights faintly but if i touch it i feel nothing. finally i put all of the original boxes from the 1996 blaster back on it including the bad stator and it still lights up faintly. This blaster is equipped with a throttle overide system (TORS) that shuts off the engine if it gets stuck wide open. i unplugged this and still no spark but the tester lights up but only about a quarter as bright as it is on my friends 2006 blaster. Can Any one help me out?

Thanks, Derek

[hondaracer11]

you might wanna post this in "QUAD CENTRAL" you will probally get more replies

[TJ BIG DAWG]

disconnect the TORS from the carb the throttle and the box under the nose cover and it will run just fine...trust me this is a common problem!

[scooterroo]

yeah should move this to q.c. , but do like dawg said and make sure you check all your connections. you made sure it didnt shear the keyway off on the flywheel? good luck with it.

[TeamGeek6]

When youve replaced everything except the wiring and it still doesnt work, then its bad wiring. Its always bad wiring, motorcycle wiring is junk due to vibration and moisture.