Banshee rear hubs onto a ytm200 will they fit????

[jamiegolf]

hi guys
i bought some banshee rear hubs last night from ebay, but it stated in the listing that they fit a ytm 200 aswell? is this true??? i hope so because i have bought them now!!

[Tri-ZNate]

count your splines and I could tell ya. If a banshee set fits than a tri-z will too

[Tri-Z Pilot]

Well you'll find out when you get them:D I had banshee hubs on my tri-z.

[Yamada]

He Jamiegolf, let me know if it fit. It would be cool to be able to fit barely any wheel to the rear of my ytm-200

[jamiegolf]

the only reason i have bought banshee hubs is because i cant find any decent ytm200 ones!!! i hope they fit cus ive gota wait 10 days for them to arrive from the states. thats 10 days of no riding!!!!

[SWIGIN]

they should fit

[jamiegolf]

i hope so im not going to be impressed if when they do arrive and i still cant use my trike!!! ive ordered a few bits from the dealers aswell for the back axle just a few seals bearings and locknuts. thats all arrived today so im guna go and pick them up later!

[Youngrasher]

The hubs might fit the axle but won't the studs for the wheel be different,

[jamiegolf]

i dont know but i will let you know when they arrive, if thats the case then i will redrill my wheels to fit the hubs. easy!!

[pickleweasel_00]

yeah, the ytm should have three lugs and the banshee will have four

[jamiegolf]

my ytm 200 has 4 lug wheels, i think the ytm225 have 3 wheel lugs.

[Tri-ZNate]

my ytm 200 has 4 lug wheels, i think the ytm225 have 3 wheel lugs.

the 200 my buddy has has a 3 lug split rim on his. the 225 were 4 lug

[jamiegolf]

looking at the parts manual i have for my ytm200 it is supose to have 4 wheel lugs. they should be with me in a few days so i will let you know

[Yamada]

some ytm200 have 3 bolt hub, others got 4 studs
I think the chain driven ytm have 3 bolt hub.

[madmanwithmouse]

well if banshee fits and tri-z fits then so will tecate, blaster, mojave and lakota.

[jamiegolf]

well i had my hubs on friday guys, and guess what????? they didnt fit the wheels!!!, fit the axle fine but the bolt spacing is different!!!! no problem though as i had a set of car steel wheels that the spacing was the same as the hubs so i had a mate of mine to lathe out the centres of the steel wheels and weld them into the centre of my ytm wheels. did a nice job too, bit wider rear track as they stick out a bit further!!!

[Yamada]

Just before you posted this answer I was to ask you how it turned.
So the banshee hub fit perfect on the ytm-200 axle?
That's a great new.

[jamiegolf]

Just before you posted this answer I was to ask you how it turned.
So the banshee hub fit perfect on the ytm-200 axle?
That's a great new.

they fit the axle perfect!!!!