PDA

View Full Version : First restoration



Big red 200es
12-17-2007, 06:18 PM
Hello, I have a couple of question for you. For my x-mas present im thinking to do my first restoration.

I want to do my first restoration on a small trike.

My model disponible is: - atc 125 m (1984)
-atc 110 (1983)
- Yamaha trimoto 125 (not my preference) (1980):drool:

So I want to know what is the best trike in this choise to do some pop wheelie, trail riding, hunting , mudding :D ,to go fishing ...

Last question what is the aproxymative top speed of these bike ?

I will give new of my restoration went I begin

thanks

p-s pic of a resto of these bike (if you want)

Nick:Bounce :Bounce

Tri-ZNate
12-17-2007, 06:21 PM
I'd go with the 125m. You wont be constantly finding parts that are discontinued plus it'll do 35-40mph down a grade ;).

TwoHundredEx
12-17-2007, 08:16 PM
I'd go with the 125M also. Easier to find parts for than the Tri-moto and will be a little better for trail riding than the 110.

rally4x4racer
12-18-2007, 12:53 AM
Honda!!!! 125m!!

Big red 200es
12-18-2007, 09:10 PM
I learn the 125m have dual-range 4 speed transmision. So my question is it is cool to drive same he have 4 speed ?

thanks

Nick

Yamada
12-18-2007, 09:50 PM
I learn the 125m have dual-range 4 speed transmision. So my question is it is cool to drive same he have 4 speed ?

thanks

Nick

So my question is: Is it fun to ride the trike if it only get a 4 speed transmission.
D'apres moi, etant donner que ce n'est pas une bombe ce trois-roues, 4 vitesse c'est bien assez

Big red 200es
12-19-2007, 06:04 PM
Surement Yamada tu écris bien en français. Parle tu Français courament?

Merci

Big red 200es
12-19-2007, 11:20 PM
Hello, I buy the 125m tonight!! Im so happy I will go to pick te girl friday.

I will send you some pic during the resto.

I pay 200$ Canadian for.

If anybody have idea tell me please.


Tahks

Nick

The Goat
12-20-2007, 02:27 AM
it absolutely amazes me how close quebecois is to cajun french. the dialect has barely changed in 300 years.

Yamada
12-20-2007, 09:05 AM
it absolutely amazes me how close quebecois is to cajun french. the dialect has barely changed in 300 years.

Open the off-thread quote:
So you understood what we just said:lol:
I did not know that quebecois was close to cajun. The only cajun ( I think) I know is the singer Zacharie Richard.:lol: :crazy:

Hey Big red 200es, can't wait to see the new trike.:TrikesOwn

Big red 200es
12-23-2007, 03:23 PM
Hello, Now the 125m is here in my home. He look rought but the engine is very clean(inside). Now the engine is not on the frame. I will send pick tonigt.

nick

Big red 200es
12-23-2007, 03:28 PM
I will send the cylinder to a plac to do a little oversize and the top end for a little porting. I will put a wiseco piiston on it.

Big red 200es
12-26-2007, 12:25 AM
Now it's time to put some pic.
Tomorrow I will paint the cylinder black and I will send it for an oversize.(on the picture the top end is very dirty but now is clean) But if you have some cleaning tips I will take it. And some head painting tips. Is it better to put the paint after or before to send to an oversize?

Im the pic He look very bad but this pic was take on the first day I get It.

PS- Happy x-mas


Nick

The Goat
12-26-2007, 03:38 AM
definitely going to want to paint after, most shops steam clean. all of the paint will come off.

ceaserthethird
12-26-2007, 06:55 AM
Before you start Wrenching on a project u must Pressure Wash the whole thing ...

Send it out for a bore than paint

Big red 200es
12-28-2007, 11:32 AM
Hello, I need Gasket but I want to know if Vesrah is a good gasket. Because I dont want the engine leak.

Thanks

Nick

SYKO
12-28-2007, 11:50 AM
vesrah is a good gasket company

Big red 200es
12-28-2007, 06:01 PM
ok Thanks Sykolincon for the information.Now the project dont go very fast because the compagny to do my little oversize is close.the compagny will be open in 5 or 7 january.

Big red 200es
12-29-2007, 05:25 PM
Now, I send the head for a porting and a better cleaning then my.

Big red 200es
12-31-2007, 02:17 PM
I have a question a atc 110 seat will it fit a atc 125m 1984 ? I demand this question because to day I remove the seat from the fender to rebuild it and the iron plate under the foam was all rusty. So I need a new seat.

Thanks

Nick

Big red 200es
01-01-2008, 09:19 PM
please tell me

Big red 200es
01-02-2008, 08:47 AM
Nobody Know ???