View Full Version : gas cap restore
TrailerRider
12-13-2007, 01:33 AM
Is it possible to restore one of the old chrome gas caps from the 110 hondas? Ours is nor working good anymore. I would like to keep the orignal cap if possible.
rally4x4racer
12-13-2007, 01:48 AM
look for a new one, it would be easier. I bet you can get a new rubber gasket for it still. is it clogged up with rust - or does it have a vent?
what is "not working" about it?
TrailerRider
12-13-2007, 01:53 AM
it's the type where you turn the switch on top to "On" or "Off". Hard to start trike. remove cap and it starts right up. You have to pump the throttle a bunch to get it to start. It just starts and dies for a second or 2. Remove the cap and it fires and idles great. Runs like a champ :) 90's are fun to ride :)
rally4x4racer
12-13-2007, 01:58 AM
check the vent that goes thru it. It is probably clogged with a piece of rust. do you have an air compressor? PB Blaster?
TrailerRider
12-13-2007, 02:32 AM
No air compressor but I can get some PB Blaster. Thanks.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.