Honda >< Yamaha Hubs

[MyMistress86R]

I need to know what (if any) hubs will swap from a '86 250R to a Yamaha (specifically Banshee) or vice versa.

Anybody? Thanx in advance...

[Bryan Raffa]

lonestar has yamaha banshee spline with honda pattern,,and look killer

[SYKO]

86 R will not swap, the 83-84 will

[MyMistress86R]

LOL Thanx Raffa, but I was looking more for a free ~ $20 option.

Syko ~ Are you certain? That would solve my problem quick, fast and in a hurry.

Thanx guys

[SYKO]

yep certain, 85-86 250r and 85 -86 350x the same, 25 spline 83-84 250r 24 spline they same as tri-z blasters and such, I have honda hubs on my gfs blaster so I can get better wheels and my buddy has honda hubs off my air fooler on his tri-z so he can borrow my wheels and tires when he needs them, sorry man, I did the same mistake about a year ago.

[MyMistress86R]

Thanx for the info Syko. Greatly appreciated.

Now all I need to do is figure out what Yammie hubs will work on the R...lol.

[Bryan Raffa]

Thanx for the info Syko. Greatly appreciated.

Now all I need to do is figure out what Yammie hubs will work on the R...lol.

I can tell you this All Sport models are the same spline..yfz,raptor.warrior,banshee,blaster ,tri-z,ect

[MyMistress86R]

I'm beginning to think that just drilling the Honda bolt pattern into the Yammie wheels will be the easiest and quickest way to solve the problem.

[Dirtcrasher]

I'm beginning to think that just drilling the Honda bolt pattern into the Yammie wheels will be the easiest and quickest way to solve the problem.


Got that right, there only a few MM's off. Unless you can slot or mill that hole I don't recommend drilling it out. But you can use the spacing betweeen the existing holes to make 4 new holes in the right pattern. I'd try to lay it out real well.

The Banshee hubs fit onto a 85 200X axle if that helps narrow things down for you. They were worn and that may be why, but they did bolt on.

[cr480r]

My buddy slotted the holes on his banshee wheels so they would fit his kfx450... Its not even noticable with shouldered lug nuts... I dont know If I would do it, but it worked fine...

[BigReds Forever]

I tried 83-84 250r hubs on my 660 raptor last year, and they did NOT work. They have the same number of splines, but the pitch is different. I did however find a pair of the hardtail stamped steel honda hubs that were worn a bit and they fit on what seamed like almost perfect, unless you looked at them and realized the splines were not contacting each other in all spots. The yamaha splines are shorter and more of a V shape, where as the honda hubs are a bit deeper and more squared off. If anyone finds a good alternative to this, Id love some 4-110 hubs for the raptor.