will this carb fit my 125m?

[Ken99287]

i just bought this carb from ebay and i was wondering if you guys think it will fit my trike. how do you connect the throttle cable to the carb? i've never messed with a carb with this kind of connection before - it is the same as on the stock carb though, so it should fit. i'll just my stock main jet so that it won't run like crap. but what do you guys think, similar enough??
:confused:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=230195748253

[84honda200s]

it may. i but a 22mm carb off a 84 200s on my brother's 125m but i needed to make a intake manifold the would allow it to fit. but seeing how yours has a round bowl it should fit in there without mods.

[cr480r]

i but a 22mm carb off a 84 200s on my brother's 125m but i needed to make a intake manifold the would allow it to fit.

Did the larger carb help performance?


i'll just my stock main jet so that it won't run like crap.

I would use the jet that is supplied with the carb... It may need a larger jet to work with the larger venturi due to loss in signal strength...

[84honda200s]

Did the larger carb help performance?




yes it actually did help. but its a royal pain in the a......... to get dialed in. i have yet bin able to get it perfect. its running rich and killing plugs every other ride. so ill be leaning it out again ha ha ha. its worth it though.


i would use the jet it comes with too. the only reason i didnt is because the carb i used came off my modified 200s motor and the jet was a 110. let me know what jet it comes with so i can buy one ;) .