mudduck14843
05-22-2003, 01:59 AM
GRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR
only a little over a week till trike fest and i STILLLLLL DON'T HAVE MY @#$%EN HEAD BACK FROM THE GUY THAT IS SUPOSED TO BE DOING THE WORK ON IT !!!!!!!!!!!!!!!
everything else is ready to go except the gas tank (stickers are ordered)
kept getting beat on ebay at the last seconds got sick of them and ordered oem stickers but might not have them by trikefest....
thats the first one
i replaced the stator coil on my 250r (after ordering it 3 times)i got great spark now!!!!but... i have to rebuild the topend with at least rings.
that's number 2
the new 200x all i need for the motor is a cam bearing that is ordered (i hope the tranny is good in the bottom end!!)
and the swingarm bolt seems to be rusted tight to the bearings or sleves inside the swingarm i have heated it with mapp gas but that wasn't hot enough oh yea i beat the sh@& out of it with a hammer too it wont budge it has a little over an inch sticking through the frame so i know the mushroomed head of the bolt isn't stopping it...
i plan to cut the mushroom off with my dremmel...
number 3
i have a vehicle (car with hitch, one truck)one friend with the truck and trike 250sx (beater runs awesome but...forks bent real bad)
friend with the car and trike 86 (think) 350x (hoping to get it done to ride there) see post hybrid 350x
and me with 2 machines "hopefully ready to go the 85 200x modded (not broke in and if i get my head back in time!!!!!)
my big red to put around some trails on and relax...
hmmm i see a prob how do we get 4 machines in a pickup and go 500 miles with it????
anybody going got an extra trailer the car has a hitch and the owner will tow it.
the good news is the big red is ready to ride
**EDITED**
i forgot to say this might not be in the right section i really wasn't sure where to pu it so here it is you can move it or delete it if you want to
but i feel better now
thanks
duck
quack quack
only a little over a week till trike fest and i STILLLLLL DON'T HAVE MY @#$%EN HEAD BACK FROM THE GUY THAT IS SUPOSED TO BE DOING THE WORK ON IT !!!!!!!!!!!!!!!
everything else is ready to go except the gas tank (stickers are ordered)
kept getting beat on ebay at the last seconds got sick of them and ordered oem stickers but might not have them by trikefest....
thats the first one
i replaced the stator coil on my 250r (after ordering it 3 times)i got great spark now!!!!but... i have to rebuild the topend with at least rings.
that's number 2
the new 200x all i need for the motor is a cam bearing that is ordered (i hope the tranny is good in the bottom end!!)
and the swingarm bolt seems to be rusted tight to the bearings or sleves inside the swingarm i have heated it with mapp gas but that wasn't hot enough oh yea i beat the sh@& out of it with a hammer too it wont budge it has a little over an inch sticking through the frame so i know the mushroomed head of the bolt isn't stopping it...
i plan to cut the mushroom off with my dremmel...
number 3
i have a vehicle (car with hitch, one truck)one friend with the truck and trike 250sx (beater runs awesome but...forks bent real bad)
friend with the car and trike 86 (think) 350x (hoping to get it done to ride there) see post hybrid 350x
and me with 2 machines "hopefully ready to go the 85 200x modded (not broke in and if i get my head back in time!!!!!)
my big red to put around some trails on and relax...
hmmm i see a prob how do we get 4 machines in a pickup and go 500 miles with it????
anybody going got an extra trailer the car has a hitch and the owner will tow it.
the good news is the big red is ready to ride
**EDITED**
i forgot to say this might not be in the right section i really wasn't sure where to pu it so here it is you can move it or delete it if you want to
but i feel better now
thanks
duck
quack quack