PDA

View Full Version : ideas to make the 350x run cooler


gaukel350x
10-30-2007, 04:10 PM
Ya need to get my 350x to run cooler so I was checking out that dual oil cooler setup and I was wondering if anyone did it and can you tell me if it was worth it. If it was then can you tell me the materials you used and so on.
rally4x4racer
10-30-2007, 04:29 PM
I had an oil pan once that had pipes welded to the bottom of it. Air flow thru the pipes cooled the oil pan ...

just an idea - you may be able to apply it to your question. I would like to do something to cool mine too
SWIGIN
10-30-2007, 05:33 PM
id just go to a 450r oil cooler....my coooler is off a street bike but is the same size as a 450r cooler and that motor is the coolest running 350x iv seen yet.



this is for your quad right?
gaukel350x
10-30-2007, 05:44 PM
By 450r do you mean the 400ex oil cooler and this is for my 3 wheeler
SWIGIN
10-30-2007, 06:16 PM
no by 450r cooler i mean trx 450r cooler ........ but never mind...this type of cooler would be hard to mount on a trike
Dirtcrasher
10-30-2007, 07:32 PM
Why is it running hot? Where is El Cajon? Hell??
gaukel350x
10-30-2007, 07:46 PM
El cajon is on the outskirts of sandiego and I don't know wht its running hot. I just measured my jug temp and right now in el cajon and itd 75 degrees outside and I have a fan blowing on it and it reads 225 and up.
rally4x4racer
10-30-2007, 11:14 PM
225 and up? give us a range. 225 is not that hot.

mic your plug if you are using a laser. the plugs job is to radiate excess heat
gaukel350x
10-30-2007, 11:27 PM
Ok well the next time I'm at the desert I will lazer it and show you guys a true reading of how hot this beast gets
gaukel350x
10-30-2007, 11:35 PM
Ok well the next time I'm at the desert I will lazer it and show you guys a true reading of how hot this beast gets