300r quick?

[Nightbiker07]

well, i havnt ridden one, and mine is still being constructed.
i have a few clowns telling me that it wont hold a candle to their modded 450's.
i personally think there stupid and arrogant, but what you guys think?

BTW, this thing will eventually get a 4mm stroker crank to go with the 300 kit.

another Q, i have some new boyessen power reeds, and what appear to be some carbon fiber reeds (used, think there boyessen PRO). what would be better to leave in it for more power?

[Huffa]

The 450's will get the power to the ground better, that's for sure. I would think on a short run they would be pretty close but the the 450 would motor away once your above 50 or so, all just a guess of course.

Here ya go on the reeds .............

http://www.3wheelerworldforums.com/showthread.php?t=73234&highlight=boyesen

[factoryX]

the 450's are'nt that fast...banshee is faster and if a R can keep up with them, then i am sure your trike should be able too....

[Huffa]

I usually never reply to these "what's faster" post but how in the world is a R faster then a 2 cylinder 350cc banshee ?

I'm not talking drag racing here because a lot of off the line rider reflex is involved, I'm talking if you side by side, on perfect traction terrian where there is no wheel spin involved and pin it, I just don't see how a R would keep up ?

[200xman]

The 300 kits are surprising. I was beating piped and carbed liquid 250R's with mine in the drags at TF.

[JasonB]

ya I cant wait for my 300R to be finished so I can see what its worth . Damn thing better be quick!

[SYKO]

yea the 300s fo some odd reason (I guess port layout) make stupid tourqe, I did some draggin a few 400ex's and a 450r and we were always neck and neck and then over all speed I could pull them any way, but even though we were neck and neck I was leavin serious roost and diggin a trench and lifitn the front even if I was leaning forward and clutching it!!! 1up will tell you how the fare agains the quads, he drags his all the time and destoyes!

[JasonB]

my 300r kit is going to be ported to the max. With my 6inch extended swinger and some 4-snow drag tires I should be able to drag mine out and get some good results:w00t:

[wizzard]

What's with all this talk? Line 'em up !

[ceaserthethird]

don't for get to up-grade your Exhaust & Carb ... with 300R Kit !

[1upfront]

Here's me smoking a trx450r with hrc kit.
http://i39.photobucket.com/albums/e183/lrdunlap/th_uvs070812-009.jpg (http://s39.photobucket.com/albums/e183/lrdunlap/?action=view&current=uvs070812-009.flv)
Me and a modded yfz450.
http://i39.photobucket.com/albums/e183/lrdunlap/th_uvs070812-007.jpg (http://s39.photobucket.com/albums/e183/lrdunlap/?action=view&current=uvs070812-007.flv)
Here's me smoking a piped 700r raptor.
http://i39.photobucket.com/albums/e183/lrdunlap/th_uvs070826-007.jpg (http://s39.photobucket.com/albums/e183/lrdunlap/?action=view&current=uvs070826-007.flv)
Here's me and a heavily modified yfz450 with 4snow tires this guy is sponsored too, he gave me a pretty good run though.
http://i39.photobucket.com/albums/e183/lrdunlap/th_uvs070909-005.jpg (http://s39.photobucket.com/albums/e183/lrdunlap/?action=view&current=uvs070909-005.flv)
The 300r is a very potent racing machine and finely tuned it's an animal!!

[mike from long island]

Very impressive 1upfront.That should answer all opinions!!!!! I like the vid as proof.The camera never lies!!

[Nightbiker07]

yea, i got a DG pipe and silencer already. WOOT

[edog]

I like how you added injury to insult with the wheelie with your duel with the 700.lol

[1upfront]

Thanks man this 300r of mine has been very good to me at the drags even though it's kind of a handfull to keep the front end down but I've developed a riding style to remedy this. Next season I'll have headwork done a +2 swinger and a forged ported piston so I should break into the high 4 second range in the 300ft.:naughty:

[toocheaptosmoke]

Thanks man this 300r of mine has been very good to me at the drags even though it's kind of a handfull to keep the front end down but I've developed a riding style to remedy this. Next season I'll have headwork done a +2 swinger and a forged ported piston so I should break into the high 4 second range in the 300ft.:naughty:

Nice, I'd like to get out to the drags next year and hopefully learn a few things from you guys. Always a good time watchin a trike kick *Edited**Edited**Edited**Edited**Edited* in the drags. :beer

[tri-Z ripper]

that thing looks sick! wanna build a drag trike myself! like raffa and his nasty beast!!

[1upfront]

Nice, I'd like to get out to the drags next year and hopefully learn a few things from you guys. Always a good time watchin a trike kick *Edited**Edited**Edited**Edited**Edited* in the drags. :beer

Make sure and come out to thunder valley next season and race man it's wicked fun and I'll help you fine tune your airfooler. Next season I should have my 350r airfooler full drag trike done and I'll be running in the outlaw class too.

[SYKO]

Make sure and come out to thunder valley next season and race man it's wicked fun and I'll help you fine tune your airfooler. Next season I should have my 350r airfooler full drag trike done and I'll be running in the outlaw class too.


mmmmmhmmmm...your not the only one with a 350 air fooler coming around.....hehehehe........:twisted:

[oldsking86]

haha yea but he's in another area... area code to be exact!

[1upfront]

mmmmmhmmmm...your not the only one with a 350 air fooler coming around.....hehehehe........:twisted:

The only difference is I'm gonna do a 4mm stroker crank to get the full stroke that the fl would have also. But Alan's is gonna be a total sleeper because the cylinder he's using is the bore of a fl350 squeezed into a 300r kit, mines gonna have the big old fl350 cylinder and head.

[toocheaptosmoke]

Make sure and come out to thunder valley next season and race man it's wicked fun and I'll help you fine tune your airfooler. Next season I should have my 350r airfooler full drag trike done and I'll be running in the outlaw class too.

Thanks man, I'm definatley gonna try to get out there, hopefully I'll have a job with some weekends off next summer.

[Nightbiker07]

yeap. ima going to stroke mine too. got the crank, just got to get it rebuilt.

[ATC4ever!]

OMG! Talk about beat down! On Video too! 1upfront, you wrong for that....LOL I put one of those whoppins on a guy with my 86' Liquid R and he had a new Honda 450R in AZ, what made it wrost he was going to MMI. Couldn't beleive that he didn't know what the power band on 2 strokes were like. He knows now though!....LMAO! I want my 84' Airfooler to be faster than my Liquid R. Think that's possible 1upfront?

[brapp]

for allits worth wouldnt it just be easier tostuff a cr480 motor into a air r?

[SYKO]

my 300 was faster then my 85 liquid

[1upfront]

OMG! Talk about beat down! On Video too! 1upfront, you wrong for that....LOL I put one of those whoppins on a guy with my 86' Liquid R and he had a new Honda 450R in AZ, what made it wrost he was going to MMI. Couldn't beleive that he didn't know what the power band on 2 strokes were like. He knows now though!....LMAO! I want my 84' Airfooler to be faster than my Liquid R. Think that's possible 1upfront?

I can beat liquid r's on my 83 trail r and it's a stock cylinder trail ported, last bore motor with reeds, pipe and pwk 36mm carb and I'm running an airbox with a lid, I was able to all day at trikefest now don't get me wrong there was the occasional modified liquid r or tecate that I couldn't get but not to many.

[ATC4ever!]

That's what I wanted to hear! I thought a 300R should be faster than my liquid R. Can't wait to get my 300R together! I think I'll go into the garage and make chainsaw noise while sitting on it .....LOL!

[ATC4ever!]

Oh, almost forgot. Here's a pic of my 300R Airfooler! http://i367.photobucket.com/albums/oo120/Zopt96/HPIM0016.jpg

[1upfront]

Thats an EXTREMELY nice bike man heres some pics of my airfoolers, also send me a pm and I'll give you all the info you need to set your bike up with a pwk and still run your airbox I got pictures and all.
My 84 300r drag trike
http://i39.photobucket.com/albums/e183/lrdunlap/100_0509.jpg
my 83 trail r
http://i39.photobucket.com/albums/e183/lrdunlap/100_0211.jpg

[jadleybray]

What time have you turned in the 300ft? By the way, I understand how you have to ride it, but that's just makin up for the lack of setup on the machine for 300ft. You stretch it out and your gonna gain another 2 10ths easy. Put the power to the ground!!!

Personally I run a stock cylinder tripple exhaust port with a +10 swinger 10 paddle superlights and ran a best of 4.89 at Dunefest 06, pure sand track.

I think you can easily run that or faster with a better setup...

[1upfront]

What time have you turned in the 300ft? By the way, I understand how you have to ride it, but that's just makin up for the lack of setup on the machine for 300ft. You stretch it out and your gonna gain another 2 10ths easy. Put the power to the ground!!!

Personally I run a stock cylinder tripple exhaust port with a +10 swinger 10 paddle superlights and ran a best of 4.89 at Dunefest 06, pure sand track.

I think you can easily run that or faster with a better setup...

This bike was purpose built to win in a certain cc class the 350 2stroke class and it has proven itself again and again even being 55cc's under the limit. I've already thought about building an 83 350cc stretched r on alcohol for the unlimited class its just a matter of time, so I wont go to much further with this bike besides I can already beat stretched wheelie bar banshees in my class no prob. I've ran 5.2's at 61 mph with only a plus 2 swinger on a 25 year old bike I think thats pretty impressive besides I'd rather ride it out it takes a bigger pair:acr

[Daddio]

This bike was purpose built to win in a certain cc class the 350 2stroke class and it has proven itself again and again even being 55cc's under the limit. I've already thought about building an 83 350cc stretched r on alcohol for the unlimited class its just a matter of time, so I wont go to much further with this bike besides I can already beat stretched wheelie bar banshees in my class no prob. I've ran 5.2's at 61 mph with only a plus 2 swinger on a 25 year old bike I think thats pretty impressive besides I'd rather ride it out it takes a bigger pair:acr

I have a little video footage to back that up. The last run on this clip is against a 1200 buell with a knobby. He was closing fast but couldn't close the deal.

http://i39.photobucket.com/albums/e183/lrdunlap/th_uvs080713-002.jpg (http://s39.photobucket.com/albums/e183/lrdunlap/?action=view&current=uvs080713-002.flv)

[Saul]

I could watch 1upfront n Daddio's videos all day long!!!!

[sbjones73]

man, that is just straight up sweet. 1upfront. you are the airfooler man!!!!!!!!

like some one mentioned before. video don't lie on how fast the airfoolers can be!!!! sneeky old ******* aren't they. that is why i like the old stuff.

[factoryX]

lol, I wonder how a liquid 300r would go, I have yet to get mine out yet....

[Blown 331]

Wow. 1upfront, you are the man! I've got a 1984 250R, TRI-Z and Tecate, all 3 of the big liquid bikes. But I also have an 84 R and I was going to big bore one of them it would be the 84R. I thinking it will end up with a 300 kit one day, probably not too far off.