PDA

View Full Version : 83/84 R axle bearings and seals .


Huffa
10-13-2007, 07:40 AM
Are they ever on ebay, a kit ? I didn't see any when I checked.

If not, do you have a link to a company that has a kit ?
chris200x
10-13-2007, 07:44 AM
Hey Gary.. All balls has them.. PM dads here on the forums. He's a dealer and has great prices and service.

http://www.3wheeler.org/vb/showthread.php?t=19500

I suppose you can go the oem way as well...
Huffa
10-13-2007, 07:47 AM
Good morning and thanks man!

I found them here too now.......... (would rather buy from a member though if price is fair)

http://cgi.ebay.ca/REAR-AXLE-BEARINGS-SEALS-HONDA-ATC250R-ATC-250R-81-84_W0QQitemZ230151508398QQihZ013QQcategoryZ43972QQ cmdZViewItem

Start her up in a few hours ? :naughty:
chris200x
10-13-2007, 07:53 AM
Start her up in a few hours ?

I'd respond to this statement here but dont want to be considerd a POSTWHORE!! :mad: :rolleyes: :postwhore :postwhore :postwhore
Huffa
10-13-2007, 08:01 AM
That's cool and HAVE FUN!!!

Take a small screw driver with you, carry it with you that is, for air screw and idle adjustment. Turn the air a 1/4 at a time and find out (you might know) what the stock setting is from being closed.

Usually the air screw is around 1&1/2 to two out from closed .
chris200x
10-13-2007, 08:31 AM
Sorry bud.. but that thread in the open forum has me fired up a bit.

I've gotten all my bearings from dads.. 200x, 250sx,, tri z,, and lt230. There was a mixup once with the z front axle bearings...but he even refunded my shipping charges. one heck of a nice guy!
Huffa
10-13-2007, 08:54 AM
Fired up as in pissed off ? or am I miss understanding that, maybe you mean excited ?
SYKO
10-13-2007, 09:45 AM
the bearings in a 83-85 are the same as the 85-86 to make things easy
Mrs.Mosh
10-13-2007, 12:24 PM
the bearings in a 83-85 are the same as the 85-86 to make things easy

No, the 81-84 250r are the same, but the 85-86 are a different bearing and seal.
They are also a lot cheaper than the 85-86.

The Front wheel bearing however, are the same on 81-86 250R.
Huffa
10-13-2007, 12:27 PM
No, the 81-84 250r are the same, but the 85-86 are a different bearing and seal.
They are also a lot cheaper than the 85-86.

The Front wheel bearing however, are the same on 81-86 250R.

Thanks for the correction. Do you sell them Mrs. Moshman ?

Do you sell them Mrs. Moshman, just noticed the " Now offering OEM and after market parts."
Mrs.Mosh
10-13-2007, 12:31 PM
Yes, I do but I don't want to step on Dads. I sell a lot of parts, I just don't advertise them much, because I know Dads is known for bearings. I'm not out to ruin anybody elses ventures. If you can't get ahold of Dads, get a hold of me and I will help you out.
SYKO
10-13-2007, 12:49 PM
well then how come I bought 2 sets with the same part numbers and put 1 set in my 85 and 1 set in my 83? both looked the same and were the same size and the bearings had the same numbers.
Huffa
10-13-2007, 01:20 PM
well then how come I bought 2 sets with the same part numbers and put 1 set in my 85 and 1 set in my 83? both looked the same and were the same size and the bearings had the same numbers.

Check here, see if they are the same, full parts schematics on all ATC's, very easy to use.

http://www.ridemsc.com/default.asp
SYKO
10-13-2007, 01:50 PM
well I have both shop manuals for the air cooled and liquid, I just bought bearings for both they were listed for each bike but when I got them they were 2 of the same set so I was like wtf? did I get the wrong set and since I had both apart I stuck them in each carrier and walla both fit like stock everything went back together and is tighter than.... (ok I'll not be obscene) welll.... you get the picture!
Mrs.Mosh
10-13-2007, 09:55 PM
well I have both shop manuals for the air cooled and liquid, I just bought bearings for both they were listed for each bike but when I got them they were 2 of the same set so I was like wtf? did I get the wrong set and since I had both apart I stuck them in each carrier and walla both fit like stock everything went back together and is tighter than.... (ok I'll not be obscene) welll.... you get the picture!

I don't know what you did? The bearings are the "same size" outside, but the inner diameter is completely different. Heres a pic......
Not to mention, the 85-86 is thicker than the 81-84 bearing.

http://i100.photobucket.com/albums/m40/cosmicquads/BEARINGS8002.jpg
SYKO
10-13-2007, 10:12 PM
dont know either man!! lmfao!! but Im not bs'n either! everything is ok gravy to!! wish I took pics now, oh well lets ride!
Huffa
10-13-2007, 10:38 PM
well I have both shop manuals for the air cooled and liquid, I just bought bearings for both they were listed for each bike but when I got them they were 2 of the same set so I was like wtf? did I get the wrong set and since I had both apart I stuck them in each carrier and walla both fit like stock everything went back together and is tighter than.... (ok I'll not be obscene) welll.... you get the picture!

Everthing as in you have both axles back in place? I of course ask this because of the larger inside diameter of the 84.

Another ? is how in the world did the diameter of the bearing pressure pipe (not sure what correct name is) fit right against the smaller diameter bearing ? You think it would be against the seal instead of the metal of bearing if it was wrong?

Guess it will remain a mystery till you take it a part again. Now that bugs me and their not even my trikes ! :lol:
SYKO
10-13-2007, 10:44 PM
lol me to!! oh well they both roll!!