PDA

View Full Version : Any expereinced PA/NJ/NY welders here ?


Huffa
10-11-2007, 09:52 AM
I'm in NE PA, town of Slatington and I have a small job (should not be too hard) I want done and wondering if someone would be willing to help me out.

Travel is no problem if the job can be accomplished. I want nice welds too, sorry, I'm pretty picky, so if your just so, so and really not confident in your work, then no need to apply for the job :lol:

.......or if you can recommend someone, that would be great too.

If interested post on here or shout me a PM........Thanks !

~Gary
oldskool83
10-11-2007, 10:46 AM
Mike at HRE, he built deathmans 250R frame, hes doing work for me on my 200x, and builds bikes for pro riders...he fixed some guys tiger 500 frame that needed weled up and made the weld look just like the tiger ones from the factory he told me. hes about 30 mins west of me.

hreatv.com
freaksfix
10-11-2007, 12:51 PM
what you need done? i might beable to help...
Nightbiker07
10-11-2007, 01:11 PM
make sure we know the type of material to be welded.
it takes different equipment to weld aluminum or steel.
Huffa
10-11-2007, 03:12 PM
make sure we know the type of material to be welded.
it takes different equipment to weld aluminum or steel.

All steel buddy .

Well 1st freaksfix (hope that name doesn't imply your craftmenship :lol: ) naturally I'm going to contact the cloest and if Mike does'nt work out, then I'll give you a holler.

Thanks oldschool, I'll give him a call/email. See what he can do, I appreciate it. Your 90 minutes from me so a 2 hour drive or so isn't bad for taking it to a skillful welder that works on these machines.
chris200x
10-11-2007, 03:17 PM
Huffa, is this something small that can be shipped? I've sent many things to shawn (sblt500r) up in Mass. and he's done wonders for me. He welded up my Z cylinder,, my engine cases in a few spots, ,, my lt230 axle carrier,, and a few other things. Cleanest welds I've seen...
Huffa
10-11-2007, 03:20 PM
Huffa, is this something small that can be shipped? I've sent many things to shawn (sblt500r) up in Mass. and he's done wonders for me. He welded up my Z cylinder,, my engine cases in a few spots, ,, my lt230 axle carrier,, and a few other things. Cleanest welds I've seen...

No it's not small at all :lol:, he needs the whole trike, thanks for the info though!