View Full Version : yamaha serial number
Yamada
09-23-2007, 05:43 PM
I observed on my 84 ytm-200e that all the parts are stamped 24W00.
My 83 ytm-200 is stamped 22v00.
If my logic is good these number represent the model and year of the trike.
I won a used cylinder and piston for a ytm/bw 200 on ebay and it is stamped 36X00.
Can someone help me identify this cylinder????
Kevo225dx
09-24-2007, 06:13 PM
These are the numbers from my clymer manual. I didn't see the numbers you listed. I don't know if this will help you or not. Good luck.
YTM200K 21V-000101-100100
YTM200L 21V-100101-160100
YTM200N 21V-160106-on
YTM200EK 24W-000101-100100
YTM200EL 24W-100101-on
YTM225DXK 29U-000101-060100
YTM225DXL 29U-060101-on
YTM225DXN 29U-100101-on
YTM200ERN 52G-000101+on
YTM225DRN 1EV-000101-on
YTM225DRS 1NV-000101-on
YFM200N 52H-000101-on
YFM200DXS 1NU-000101-on
Yamada
09-24-2007, 07:17 PM
May be I misread and one of the number is 21V-00 for the ytm-200
24w-00 make sense for my ytm-200e.
Make me wonder if my spare cylinder is off a bw 200.
thank you for your help kevo225dx
thefox
09-24-2007, 07:26 PM
Yamaha also re-uses parts, for example, if the part was designed for a 200 (21V) and then used on the 200E (24W) later it would still retain the 21V code.
Rich1028
06-27-2022, 07:57 PM
this might be to old of a post to be found, but what Year is mine as well?
29U-070055
El Camexican
06-27-2022, 11:38 PM
I “think” the 29U parts are indicative of a 1985 225 trike. The fox’s post mirrors my experience.
If you go to the yamahapartsfish site and go back and forth between all the 1983 to 85 models you’ll soon be able to figure out what’s what.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.