View Full Version : 200x Chain Length
hondari\
09-14-2007, 05:26 PM
ok so i got a 13 tooth front sprocket and a 35 rear what link count do i need its an 85 200x
84honda200s
09-14-2007, 06:10 PM
im going with a 14/35 set up and rite now i have a 11/35 set up. when i did the jump from 11/40 to 11/35 i had to take only 1 link out and i tighten it up. so if you take one link out you should be fine. if you can wait till i get home tomorrow ill count the links for sure.
hondari\
09-15-2007, 12:01 AM
sounds good just let me know
84honda200s
09-15-2007, 12:50 PM
it is 86 links long with a 11/35 set up.
hondari\
09-16-2007, 12:34 AM
so if i have a 13/35 would 86 work because the stock 88 is way to big
84honda200s
09-16-2007, 12:46 AM
yup but to be sure put the sprockets on then try the chain. if its too big cut 1 link out. then repeat.
hondari\
09-16-2007, 12:50 AM
whats the easiest way to take a link out
84honda200s
09-16-2007, 02:41 AM
grind the pins down smooth, put the chain in a vise then use a center punch to knock the pins out.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.