tri z nerf bars

[HEAD09]

well is there anything out there that will fit....i would like to use a heal guard off of ytz or 660 or anything just dont know what will work....thx :pics: would be great if you have them...

[Bryan Raffa]

mine came off a banshee.. just like everything else..a little cutting and grinding..

[Tri-ZNate]

Great another addition I have to do to my Z :lol:. You and Ronnie man, ronnie makes the custom stuff and you find the stuff that works. You save us all alot of money ;)

[honda250sx]

ooooh me likey that. GIT SOME! :)

[Bryan Raffa]

you will like this too!:D

[honda250sx]

did you ever know that your my hero.......... :)

[LonesomeTriZ]

Any thing can work as long as you are willing to make it so.

[fla 2-stroke]

mine are off a banshee also.

[Tri-ZNate]

does the year matter for the nerfs?

[Bryan Raffa]

you want the smaller ones,, not the big square ones,

Fla.. I see you went with both bolt holes on the pegs.. what did you do about the gap on the front? did you use the U bolts?

I cut the tubes down and the connector pice to get a closer (in) fit. then drilled and bolted it down

[fla 2-stroke]

last owner put them on.he put a piece of pipe between the 2 sides.they are sturdy but I really dont like them.I am going to take them off.seems to fit well though.

[HEAD09]

thx guys for the info...one more thing do you like them better...(are they confrontable) or is a just a safety thing too have them one there...

[Bryan Raffa]

I have gotten use to them.. I dont even notice them when rideing

the only time I do is when my foot slips off a peg;)

[LonesomeTriZ]

last owner put them on.he put a piece of pipe between the 2 sides.they are sturdy but I really dont like them.I am going to take them off.seems to fit well though.


Were there any other mods to get them to work?

[Bryan Raffa]

no mods to the bike on mine,, just the nerfs.. I cut one of the net ties by the shifter off so I could get in there un-restricted

[LonesomeTriZ]

Are Banshee nerf bars any bigger than Blaster nerf bars? I would think a smaller set would be better.

[HEAD09]

i would also like to know that thx again...

[ATC-Eric]

I think I might have to getmyself into a set.......

[Bryan Raffa]

Are Banshee nerf bars any bigger than Blaster nerf bars? I would think a smaller set would be better.

I would check and see it the peg holes are the same... stay away from the ones that mount to the frame. You want the ones that mount with the U bolts. and the front that is narrower..they kinda taper to the front..

[LonesomeTriZ]

When I tear my Blaster down again, I will do some test fitting. They do not use U bolts though. WHat brands would be good to look for if buying a used set from ebay?