PDA

View Full Version : Is this bad?


booblinker
08-23-2007, 12:39 AM
Got a non running 3 wheeler on a trade, told it needed rings. Pulled it apart and this is what i found.
http://i99.photobucket.com/albums/l318/booblinker/3%20wheeler/IMG_0987.jpg
http://i99.photobucket.com/albums/l318/booblinker/3%20wheeler/IMG_0992.jpg
blue27
08-23-2007, 12:58 AM
yes that is bad!!!
84honda200s
08-23-2007, 01:06 AM
hmmmm yea thats really bad. what kinda trike is it ? if its a 185s or 200s i have extra heads and rocker covers ill sell ya. but im fresh out of cams.



welcome to 3ww by the way
Trouble
08-23-2007, 01:08 AM
damn, yes that is bad.

oh and :welcome:
booblinker
08-23-2007, 01:12 AM
Its a 200x. i just ordered the new parts $200 woohoo, probably got ripped but want it ready for silver lake one September 16th.
84honda200s
08-23-2007, 01:16 AM
i could have gotten you a brand new o.e.m cam for 60 and ebay or someone on here could have gotten you a head and rocker cover allot cheaper.

but i guess 200 isnt all too bad.
booblinker
08-23-2007, 01:17 AM
i could have gotten you a brand new o.e.m cam for 60 and ebay or someone on here could have gotten you a head and rocker cover allot cheaper.

but i guess 200 isnt all too bad.
Sorry 200 is for rings, exhaust rocker, cam, and gaskets.
84honda200s
08-23-2007, 01:23 AM
ooooo not too bad at all. who you go threw.
booblinker
08-23-2007, 01:25 AM
ooooo not too bad at all. who you go threw.
Bikebandit.com Never used them, but seem to have almost anything.
84honda200s
08-23-2007, 01:52 AM
ive never used em either. but ive herd they are good.
mdskinner731
08-23-2007, 10:16 AM
nope not bad at all... id run it for another couple of years...
lol sorry i had to be a smart *Edited**Edited**Edited**Edited**Edited*
firefirefire90
08-23-2007, 04:10 PM
wow! Look how warped that cam lobe is!!
Mobular
08-23-2007, 04:47 PM
Ok, a simple fix, but what's caused it? Why's the rocker broken? Did it sieze on the shaft? Did the valve drop? What is going on inside the cylinder?? One last thing, never use mismatched parts. Use all new or a matched set of used cam and rockers. Mismatching used surfaces will pretty much guarrantee another galling problem right away.
SWIGIN
08-23-2007, 04:49 PM
you might want to get the other rocker so you have a fresh surface rubbing on that new cam so you dont tear it up.

also check the oil pump ....make shure its working 100%



edit.... after looking at those pics again i would split the cases and clean that motor out before running it....all that metal went someware