PDA

View Full Version : help me out on hub sizes


GeniusBlock
06-12-2007, 02:36 PM
Bought a rear hub off ebay for my 200es. splines fit, but the bolt pattern was too small...the guy mis advertised it, made it right, but I want to clarify. 200, 200e, 200es, 200m are these all the same hub? if so, what do you think this hub came from?
RedRider_AK
06-12-2007, 05:06 PM
Maybe you had mismatched hubs on your ES and you finally bought the right ones? All the old Honda three-wheeler hubs I remember looked the same, other than the 3-stud ones for the old 90's, 110's and 70's. They might've been off a 200X, but I'm pretty sure those are big ones too.
Howdy
06-12-2007, 07:46 PM
185, 200, 200e, 200es, 200m uses a 4/150 hub
late model 110, 125m, 185s, 200s, uses 4/130 hub
Most 250r's, all 200x's, 350x's use 4/110 hub
75-78 90's, 79-82 110's, 81 250r's use a 3/100 hub

Hope this helps
Howdy
RedRider_AK
06-12-2007, 07:51 PM
Holy crap i had no idea there were 3 different 4/something patterns for Honda trikes.
GeniusBlock
06-13-2007, 09:30 AM
Very helpful, thanks. The hub itself looks identicle...but it is too small..
Howdy
06-13-2007, 09:42 AM
Very helpful, thanks. The hub itself looks identicle...but it is too small..

You probably have a 4/130 hub. I'm pretty sure I have a 4/150 hub at the shop. Shoot me a offer for one via PM if you still need one. FYI, Shipping would be $5.50 or so. You may have to put the studs back in though ( they ship better / cheaper removed ).
Howdy