is there a difference

[fast94tracer]

is the a difference between stators on 85s that have the stamping 7DY and 6DY
are they an interchangable part?

i knowticed in the manual it states that the nd stator should have 50-200 ohms
and the mitsu should have 250-400 ohms

ihave the nd and mine reads 125 ohms but between the coils it reads 1.9 ohms and spec for that is .5-1 ohm

is mine really that bad or is this a miss print and should it really be between 210-240 ohms between the bl/r wire and ground?

[ATCnut]

The thing about ohms specs, they are very dependant on the meter being used.

Most of those honda manuals were written using older analog multimeters. The newer digital meters apply a different voltage to the coil.

The only way I have found to really know, is to compare to a working one of the same type using the same meter. Then you have a better reading,

[fast94tracer]

true since i am using a 3000 dollar meter made for autos

[GoodKarma]

I would think that if the part numbers were different, there's a reason for sure.