striped out oil check bolt on triz

[yyz4208@aol.com]

got all the bikes out yesterday and when I went to check the oil level on the tri z the bolt is striped out and its not the correct bolt and quick fix ? other then pulling the clutch cover and retapping its 12 pm here and I wanted to go rideing today my hard tail 200s just wont do for todays ride thanks

[hondaracer11]

vice grips to take it out maby

[hondaracer11]

after you get it out run to the hardware store

[yyz4208@aol.com]

no problem with it coming out I am trying to keep it in

[team-red-rider]

jb weld tht bitc

[yyz4208@aol.com]

no jb weld that *Edited**Edited**Edited**Edited* is junk I am just going to pull the clutch cover and re tap it

[ceaserthethird]

No Quick Fix's , Asking for Trouble .

Do it right the first time !

[mohadib]

Could I use jbweld to adhere a nut to the top of the oil bolt, then use a socket? Is jbweld strong enough for that? Thanks

[Yamaha_Rules69]

No, JB weld would never be strong enough to take even the lightest twisting force of a wrench.

[mohadib]

ok, thanks, ill try the easy out first

[xbenzx]

Take your engine or bike to an autobody shop. They should be able to retap to a bigger bolt . thats the only thing I can think of but probably the best thing.