help with my new 200X

[team-red-rider]

ok i got my 200X from alan (thx again!!) and well to be honest wanna redo it as a rider nothing special...ok so here we go.....i need to kno if anyone here has DETAILED instructions on how to replace the kickstarter spring ...with pics possibly? also does anyone have a COMPLETE rear brake setup for sale cheap???? possibly a front and rear fender (not new,dosent have to look good! i need NON BROKEN! faded or painted OK)...and hey thx for the stickers billy

[kilabeez0]

most common problems on every single 200x. you and everyone else wants those parts. good luck even finding a rear brake setup!

[digity x]

hard parts not really my friend doug bull has alot of parts to get that 200x stopping again.

[team-red-rider]

any ideas on price....also at least i have new front brakes lol

[crazyratt]

My 200x has all the same troubles. Did you look at manuels yet

[oldskool83]

you can find the rear brake set ups on ebay but be preparied to pay a good $75-$100. trust me ive lost 2 auctions already. as far as fenders, there are some nice ones are ebay but plastics that are 22-24 years old can look nice but be very brittle. i went with a 250R front fender on my 200x, most 200x ones i found were just to brittle.

[team-red-rider]

ok well i have a bigger problem...i cleaned the carb and stuff its getting fuel...but not spark (i dont think so anyways) so yea it wont start anyideas? (yes it has a new NGK in it
)

[blue27]

make sure it has spark first.

[team-red-rider]

ok i got it running had to pull it with the lawn tractor....i got aNOTHER new NGK (the new one didnt work started right up with the old one...now the new one works...) also i got a new 55 watt headlight...not to many watts is it? and well anyone here have a clutch cover /kickstart cover gasket for sale..

[BigGreenMachine]

Change out the coil. I seen a Raptor brake caliper works using the 200X mounting bracket.

[team-red-rider]

Ok lemme rephraze that...the new NGK i got first didnt work...the old one it started right up..so i got ANOTHER new NGK and it works....i just have to clean the carby