Sectional or Stamped Pipe's - Post your Pic's - ATC 250R

[ceaserthethird]

Here's my First Sectional Pipe - ATC 250R '85 - '86

I just bought this pipe , got done Cleaning the Rust off it , Came out pretty nice ! :D

Brand - CT Racing , www.ctracing.com Still in Production!

Post pictures of your Sectional Pipe's :pics:

[SYKO]

looks exactly like mine, when I bought it the seller told me it was an old CT but then my engine tuner and another racer told me it may most likely be a OLD dg.

[ceaserthethird]

Got any pictures -

Here's another pipe i found for sale

[SYKO]

i dont think i have a close up but heres a far off shot.

http://i42.photobucket.com/albums/e306/southgacustoms/MVC-866S-1.jpg

[dirtface]

Someone correct me if I'm wrong here, but I have been around for a while, and I don't ever remember DG ever making a sectional pipe.

[SYKO]

from what Im told its an OLD DG.. if its a DG like one of the first few made

[firefirefire90]

I don't think yours is the same Syko. From the angle of the picture, your pipe has a less of an extreme bend at the top. Yours seems to curve smoothly while his has that sharp 90 degree angle to it.

[SYKO]

true... good call. but they still are similair as the front portion is stamped and the middle to rear portion is sectional, could be the same comapany just differnt pipes.

[oldsking86]

Yours is like mine.. looks exactly like mine actually

http://usera.imagecave.com/lilcuban38/100_0233.JPG

I can get another pic f it tomorrow.. a more clear shot.
It's a Bill's Pipe what I have and you may have also

You'll really notice a power change with it on there :lol:

[ceaserthethird]

Awww Shoot .... Bill's Pipe

I have a Bill's Pipe on my 250R now - Pic's

[oldsking86]

haha that's the one.. that particular model you have posted there kinda reminds of the PT pipes.. This sectional chamber is very tall and think throughout the mid and base sections. It gives a very deep rumble, I've heard mine next to a PT piped 250r and it didn't have the sme sound at all. Try it and you tell me what you think of it haha I know for a fact I love mine!

[ceaserthethird]

I plan to add the Sectional Pipe to this Answer Silencer - Pictured :naughty:

[oldsking86]

Let us know on the results and sound of it all together. After that go and race a 450r then tell the story as I did haha wait I got 2 450's back to back on 2 days back to back lol

[ceaserthethird]

Re-Finish The Answer Silencer ( Gave it the Stainless Steel Look ) & Re-Packed it .:beer

Here's the Up-dated pic's

[RoscoW]

Here's some pics of one of the sectionals that came with my R's. Not sure of the make, sounds good, doesn't seem to have a kick in the pants range to it , just good across the whole range. I'll post some pics of my other ones as soon as I get them cleaned this weekend.

Ross..

[Ordo]

When I bought the pipe with the smaller mid-section the guy told me it was a DG. I thought he just didn't know really what it was until recently when this thread started. The larger of the two pipes had a lower frame bracket that is broken off and have yet to figure out who made it.

[350xBomb]

Hey ceasar...ment to say thanks for the silencer...works great.

[86waterpumper]

sykolincoln, your pipe is more likely a ct than the one chrome one first posted. I have a few sectional pipes, here is a pic of a ct pipe

http://www.fototime.com/{C6741145-4394-407E-9A39-D1F644483841}/picture.JPG

you can always tell ct's because they had a far larger stamped out section than other pipes, as you can see the stamped portion continues even part of the way up the side of the expansion chamber, where other pipes are sectional closer on down to where the bottom bend is. The coolest pipes in my opinion are the ones such as the klemm's or the selvy's etc that were sectional all the way to the exhaust flange, alot of work went into those puppies. The ct pipe is a good mid to topend power pipe, here is the one I've got on my R flattracker now http://webpages.charter.net/willchilds/pipe.jpg you can see in the pic of it mounted http://webpages.charter.net/willchilds/flattracker.jpg that the top bend of it sits really low, the expansion chamber also is fat and sticks out where you nearly hit it kickstarting the bike, this pipe hits right off the bottom it's definately a low end pipe. Anyone ever seen any of these? This is a two piece lrd adjustable R pipe, stamped but pretty cool has a huge expansion chamber.
http://www.fototime.com/{351C75B5-DA6B-42ED-8428-E7AFEF15B34D}/picture.JPG

[SYKO]

mine dosnt carry the same bend as yours plus dosnt even look to fit near what yours fits I will have to pull my trike out and take some more pics

[86waterpumper]

Well the pipe I'm referring to as being a ct is the pipe in the first pic I posted. I know the pipe mounted on my bike in the toher pic is not a ct. It's totally different in alot of ways. I've never mounted the ct pipe so I don't know how it fits or doesn't fit, Not sure if the one on your bike is a ct or not coudnlt' see it real good in the pic etc.

[ceaserthethird]

Hey guys check out the new Sectional pipe -:naughty:

Brand - CRF / Crotch Rocket Factory. Sectional ATC 250R pipe

[1upfront]

Heres one I'll be installing on my 83 R after it's been media blasted and painted :naughty:
http://i39.photobucket.com/albums/e183/lrdunlap/f5.jpg

[Billy Golightly]

Yes...Crotch Rocket Factory. Very rare, I seen one for a Tri-Z one time. Supposedly the only one that could compete with Harry Klemms pipe.


Heres an LRD pipe for a Z.

http://i150.photobucket.com/albums/s100/HondaATC/DCP01491.jpg
http://i150.photobucket.com/albums/s100/HondaATC/DCP01489.jpg
http://i150.photobucket.com/albums/s100/HondaATC/DCP01488.jpg

[tecat-z]

Very nice LRD tri-z pipe. Where did you score that. Brand new pipe and silencer combo. Sweet, and most importantly, eye candy you don't see very often. Now i'm jealous!!

[mike from long island]

Here is my chrome LRD exhaust.

[jason 32]

?? dyno port/ or doma???

[Billy Golightly]

I got that LRD pipe from Power Pros, which is the pipe manufacturer for probably 95% of the shops out there. The shops come up with the pipe design, and then contract out to Power Pros in most cases because they have the equipment and ability to build the pipes on a mass scale. Mine is the last one made, ever. I wish I could remember the guys name, but he said when mine came out of the jig it was scrapped. Its been on my Z for a couple years now, I need to get it off and clean it up some as it had started to rust pretty bad around the front section.

[Billy Golightly]

Heres another pipe you guys might like to see. Its made by Jolly Moto in Italy and is for a CR500. They cost about $1200, but if you look at the cone shaping and bends in it, you can see how smooth and rounded everything is. There are no corners are angles on it anywhere.

http://i150.photobucket.com/albums/s100/HondaATC/jollymotoos6.jpg

[ATC-Eric]

Heres another pipe you guys might like to see. Its made by Jolly Moto in Italy and is for a CR500. They cost about $1200, but if you look at the cone shaping and bends in it, you can see how smooth and rounded everything is. There are no corners are angles on it anywhere.



Thats a work of art! :drool:

[doughdog]

Here's the pipe I just picked up on ebay for my "85 250r project. It came with an Answer silencer, but I don't know what brand it is.
http://i236.photobucket.com/albums/ff71/doughdog/IMG_3824.jpg

[toocheaptosmoke]

I think it's a CT custom pipe, 18 bucks on fleebay. :w00t:

http://i20.photobucket.com/albums/b211/toocheaptosmoke/3957_3.jpg

[1985ATC250R#155]

Bills pipe 85-86 250r.

[jeffatc250r]

Heres another pipe you guys might like to see. Its made by Jolly Moto in Italy and is for a CR500. They cost about $1200, but if you look at the cone shaping and bends in it, you can see how smooth and rounded everything is. There are no corners are angles on it anywhere.

http://i150.photobucket.com/albums/s100/HondaATC/jollymotoos6.jpg

Good god that thing is beautiful! :drool: Is it for a cr 500 bike or is it for a trike conversion? Is it clear coated? Or do you just not use it?

[ceaserthethird]

LRD - Fully Adjustable Pipe & Silencer kit '85-'86 ATC 250R ( Discontinued )

http://i72.photobucket.com/albums/i167/ceaserthethird/Rare%20ATC%20Parts/71dd8787.jpg
http://i72.photobucket.com/albums/i167/ceaserthethird/Rare%20ATC%20Parts/2e9a1c89.jpg
http://i72.photobucket.com/albums/i167/ceaserthethird/Rare%20ATC%20Parts/e17bb7b8.jpg
http://i72.photobucket.com/albums/i167/ceaserthethird/Rare%20ATC%20Parts/a7996f71.jpg
http://i72.photobucket.com/albums/i167/ceaserthethird/Rare%20ATC%20Parts/0bba2788.jpg
http://i72.photobucket.com/albums/i167/ceaserthethird/Rare%20ATC%20Parts/0d7e9f0f.jpg

[ONEBAD350X]

http://i88.photobucket.com/albums/k196/kjgroen/photobucket-11329-1349367617931.jpg ive asked before but never really got a definite answer as to what kind of pipe this is?

http://i88.photobucket.com/albums/k196/kjgroen/photobucket-34835-1349134934283.jpg

the head piece is stamped the rest is coned it seems to be a real good low to mid pipe with my 330bb but I have nothing else to judge it to. I want an atc5 and will prob sell this one.

[Mr350x]

Here's my First Sectional Pipe - ATC 250R '85 - '86

I just bought this pipe , got done Cleaning the Rust off it , Came out pretty nice ! :D

I don't know the Brand , No Marking's ! :wondering

Post pictures of your Sectional Pipe's :pics:

I can't post pics of mine because I'm using my phone but I have the exact same pipe and have been told by a few different people that it is a ct pipe.. Ill try to post some pictures tomorrow.. It's an awesome pipe!!

[ceaserthethird]

ANSWER S-II , Equalizer - Silencer ATC 250R '85-'86

http://i72.photobucket.com/albums/i167/ceaserthethird/Rare%20ATC%20Parts/105_0460.jpg
http://i72.photobucket.com/albums/i167/ceaserthethird/Rare%20ATC%20Parts/105_0462.jpg