PDA

View Full Version : Answer quick please! 350X purchase TONIGHT (Bought it!)



200xStroker
04-29-2003, 06:02 PM
Found an '85 350X that is said to be in awesome condition... only flaw my buddy could find was a cracked fender that had been "repaired" and I'm leaving to look at in in like 30-40 minutes.

Anything on this particular model to look for? It starts on the first kick on a cold morning and doesnt smoke. The owner previous was a performance builder so it's rumored to have some "work" done to it, but I can't count that as any sort of price modifer since it's a rumor.

They want $1000 for it and it has a clean title.

RCManiac
04-29-2003, 10:52 PM
It's a 350X for $1000! :shock:
If you don't get it you should be smacked! :o

200xStroker
04-29-2003, 11:00 PM
200xStroker,,, c'mon,,, update us. did you get it ???

Silly me...

http://members.tccoa.com/silkwood/rightside.jpg

Took some more, but it's dark out since it was an hour:45 drive round trip, and I had to stop and pick up the title. As you can see, it's a bit rough and needs a little work. I gave them $900 for it because it runs awesome and the title is squeaky clean.

I not sure about the "extenders" on the plastic not being painted or at least bought as the correct color. The guard on the light... well... hmm. The plastic stitches for repairing the plastic... interesting. I think I'll seek to replace the plastic in the near future.

It looks like the nitrogen resevoir for the rear shock has an adjuster on it... is that right? http://members.tccoa.com/silkwood/resevoir.jpgShock Resevoir</a>

The few things I see that I need already include:
Fork Boots
Front Brake Line (it's white!)
Front seat-mount rubbers
Brake pads front/back
Parking brake block-off plate (anyone know where to find one?)
Aftermarket exhaust (cosmetic upgrade :twisted: )

Here are some pictures:
http://members.tccoa.com/silkwood/leftside.jpgLeft Side</a>
http://members.tccoa.com/silkwood/axle.jpgAxle</a>
http://members.tccoa.com/silkwood/leftengine.jpgEngine-Left Side</a>
http://members.tccoa.com/silkwood/rightengine.jpgEngine-Right Side</a>
http://members.tccoa.com/silkwood/stitches.jpgPlastic 'Stitches'</a>

hrc200x
04-29-2003, 11:13 PM
Yes, 350x came with dials on the rezzy's. Its for compression. ALso, the front brake line is supposed to have a plastic coating over it. I don't know why, except for maybe its to keep it stiff so it doesn't bent into the front wheel.

The clutch cable is supposed to be routed down the frame behind the front tire. What do I see on the front axle? Can you take a close up of it? If your wanting to sell any parts or the fender extentions, let me know.

200xStroker
04-29-2003, 11:34 PM
What do I see on the front axle? Can you take a close up of it?

Hmm.. not sure what you're refering to, so I took shots of both sides. I have them in 1600x1200 high resolution if you're trying to see something small, here are links to them in 640x480 in case you're on dial-up. I can email you the high-res if needed.

http://members.tccoa.com/silkwood/640leftfront.jpgFront Axle - Left Side</a>
http://members.tccoa.com/silkwood/640rightfront.jpgFront Axle - Right Side</a>

200xStroker
04-30-2003, 12:17 AM
unless you like mud up and down your shoulder blades + in your face you might just want to keep them fender extenders on. 350x's are about the most mud slinging things i have ever seen.
i took my crappy front hose covering off + put a blue "wire loom" cover over mine.
yep,,, glad to see your score 200xStroker !john

Thanks John and thanks for your quick response too. I checked out those areas you mentioned and everything looks fine.

About those extenders... is there some paint or something for them?? They look out of place and "rigged" in the white.

Do you have a picture of your front hose covering? I thought this hose was off something else as a replacement or something... I was thinking blue "braided stainless" slip-on covering for mine.

208013544
04-30-2003, 11:52 AM
What kind of cover can you get for the front brake line? I did not know that something like that was available.

200xStroker
04-30-2003, 01:38 PM
Can someone post a shot of what it's supposed to look like from the factory? This thing on mine looks like it was red at one time and has since faded to... well... very light pink. Even the "boot" up where it connects to the front master cylinder is faded.. I'm assuming this "cover" from the factory wouldnt have gone up that far.

Andrew
04-30-2003, 02:25 PM
those extensions look factory! shock

200xStroker
04-30-2003, 03:14 PM
those extensions look factory! :shock:

But they are white!?!?!

trikerider2oo7
04-30-2003, 06:42 PM
Parking brake block-off plate (anyone know where to find one?)

Check at any Honda dealer. They'll either have one or they can order you one.

Dynofox
04-30-2003, 07:27 PM
Those are factory hondaline fender extenders, they're suposed to be white.

plkmonster2
04-30-2003, 08:21 PM
those extenders must be handy! esp. when boggin!

Blazin350X
05-01-2003, 05:25 PM
Looks like you got a good deal on that 350X, those fender extensions are neat. As mentioned you'll be sorry if you remove them, the 350X's can really sling the mud, snow and water. That brake line is OEM and it's supposed to be that color and it's to keep the line in place and protect it from debri.
You should be able to see it on mine.

Blazin350X
05-01-2003, 05:37 PM
I guess you can't see it to well on the small icon, try this.

Trikeaholic
05-01-2003, 06:29 PM
DANG, look at those ape hangers!

Blazin350X
05-01-2003, 09:53 PM
Ape Hangers???
They do look high in the picture, but for me there pretty comfortable riding.

sportvette
05-02-2003, 07:26 AM
thats funny, i thought that was my 350x. i put the same blue wire cover on my 350x and 250r. i put it over the brake lines like you did. guess i am not innovative after all.

Howdy
05-02-2003, 08:08 AM
What do I see on the front axle? Can you take a close up of it?

Hmm.. not sure what you're refering to, so I took shots of both sides. I have them in 1600x1200 high resolution if you're trying to see something small, here are links to them in 640x480 in case you're on dial-up. I can email you the high-res if needed.

http://members.tccoa.com/silkwood/640leftfront.jpgFront Axle - Left Side</a>
http://members.tccoa.com/silkwood/640rightfront.jpgFront Axle - Right Side</a>

In the right front picture I see something everyone over looked. I won't say yet what it is but I see it. Does anyone else see it?
Howdy

WI 350X
05-02-2003, 09:58 AM
Speedometer pickup on the front axle. It is turned upside down however and the hole that the cable hooks up to is pointing down. Typical look for the ones that have it installed. It is almost impossible to get it positioned right when you are tightening the axle. Doesn't do a whole lot of good unless you know of a Speedo cable that will work. I have had one on mine since I bought it, but the collar for that side (and the other side for that matter) are discontinued so it is the only choice for now.

clong
10-30-2006, 02:34 PM
I''ve had my 350X for a good few years and it never smoked. I went camping last weekend and rode it pretty good into the night and went to bed in my tent. It got below freezing at night. Then in the mornig it was still cold and I fired it up. The bike was really cold and took full choke and a several kicks. Then she fired and I look back and noticed it was smoking. Its never even lgihtly smoked. I watch it for about 1 minute and turn the choke off. The second I turned the choke off, the smoked stopped. It was a more of a white-ish smoke and didn't totally seem like oil but I'm not sure. Any ideas? It ran perfect the rest of the day.
Thank you

Pete
10-30-2006, 03:29 PM
just excess fuel burning off due to the choke.

theonlyjosh
10-30-2006, 03:56 PM
very nice score dude, only one i seen around here was completly mint no cracks runs perfect for $3250 canadian, FIRM, that's the only 350x i've ever seen here for sale.. awesome find!