Stripped head!! help

[Bo0YaA]

Ok I took my carb and manifold off the 100 I just picked up to do a rebuild on it and when it came time to put it back on I noticed that one of the bolt holes in the head where the manifold bolts to is stripped out causing a huge air leak now.
I was wondering if anybody has a better way to fix it other then pulling it off drilling and retapping?

Thanks

[ceaserthethird]

best bet is to remove the motor and take your time ....

[chris200x]

MAGNA STEEL... PROBLEM SOLVED! :idea:

http://www.3wheelerworldforums.com/attachment.php?attachmentid=16050&d=1126057042 :lol: :rolleyes:

[Bo0YaA]

Thats what Im looking for Chris lol can I put that in the hole and thread the screw into it? Or am I limited to what you got there.

[chris200x]

You can do just about anything with that stuff. Best 5 bucks I ever spent. LOL

Perhaps some sort of helicoil would be better though.

[SWIGIN]

http://www.emhart.com/products/helicoil.asp?gclid=CKK76J62s4sCFRk3gQoddmsOwA

[ATC-Eric]

I would say heli-coil as well. Do it right the first time, they dont take long to put in.

[Bo0YaA]

Can it be done without pulling the motor?

[200x newby]

yes very easily. if you just want a quick fix job you cold always JB weld