110 sprocket seals

[Brendan1959]

I have a 1979 110 atc, I have put a gasket kit in the top end but I have an oil leak from the sproket seals. My question is are the seals a standard size that I can get from my local bearing supply or do I need genuine honda bits?
Thanks Brendan!:rolleyes:

[SWIGIN]

if you can get the numbers off of them or let a bearing place measure them they should be able to get them

[Brendan1959]

I was hoping to have the parts before I pulled it to bits, or atleast be sure I could get them.
Regards
Brendan

[tyman]

have you checked service honda???

[Howdy]

Are you sure your seals are bad? 9 times out of 10 the chain hits the cases and cracks or breaks them. This can be a Major repair if it's real bad. I just fixed 2 of them in the past 2 months.
Howdy.

[Brendan1959]

Yep had a look a the case behing the sproket, Smashed!!!!, I pulled it apart last night and have done a bodgy repair with Sellys metal repair, I also found the cam chain is worn out so I will replace it while I have it in bits, I will have to put in tonight as I want to take it away for easter tomorrow morning.