PDA

View Full Version : Help me identify the year of these honda's



filipinoredneck
03-31-2007, 08:32 AM
Hi Guys,
I just picked up these 2 trikes for $200.00, both are said to be 200cc'c. The previous owner said the one with the engine is a 1983. It was running when he put it away in the fall. He said the other one without the engine is a 1984. Can you help me identify them?

hublake
03-31-2007, 08:43 AM
Get the VIN numbers or frame serial numbers from each and call or go to a Honda dealer and he should be able to tell you everything. The numbers are located on the steering column for lack of a better name.

edog
03-31-2007, 09:11 AM
What color are they?

mymint87
03-31-2007, 09:18 AM
What color are they?

LOL...do they have round tube frames or square tubed?...:welcome: :lol: :lol:

edog
03-31-2007, 09:20 AM
LOL...do they have round tube frames or square tubed?...:welcome: :lol: :lol:
What are you :lol: at?He changed the thread from 200CC to Honda after I asked the ?:postwhore:D

mymint87
03-31-2007, 09:26 AM
What are you :lol: at?He changed the thread from 200CC to Honda after I asked the ?:postwhore:D

:lol: :lol: :lol: :beer

filipinoredneck
03-31-2007, 09:56 AM
vin # jh3tb0504dc259596

jh3tb0548ec3191125

I will be needing parts for both...:beer

Eric250R
03-31-2007, 01:02 PM
Looks like a good start....does it run ?

filipinoredneck
03-31-2007, 01:17 PM
The orevious owner said it ran when he last put it away. I can't get spark right now. I measured the voltage output of the stator and its 180mv. I dont know if that is enough. By the time it gets to the primary of the coil, it is 3.9VDC. I don't beleive this is enough primary voltage to jump the spark plug gap. Do you know what the output voltages are suppose to be for after the stator and after the CDI pack and the primary voltage input?:beer

Bryan Raffa
03-31-2007, 07:16 PM
vin # jh3tb0504dc259596,,,,,,83

jh3tb0548ec3191125,,,,,,82

BigReds Forever
03-31-2007, 07:31 PM
the one without the motor is a honda 200e (big red) the other one is some sort of 200, maybe just a plain oll 200? but the 82 should have a small gas cap i thought. Either way, the one with the motor will interchange parts with most 185's and 200's
If you need a trunk for that one, i got one for ya cheap.