PDA

View Full Version : how to remove Maier stickers?


dizasterzrfun69
03-26-2007, 08:26 PM
How do you guys remove the ugly maier decals that they put on the plastics? I used goo-gone on my 85sx and it took away the shine and left a dull spot. any input would be great
Bryan Raffa
03-26-2007, 08:28 PM
I peeled mine off and used a little carb cleaner on a rag and got the sticky off,,then silicone detailer
Liquid-Darkness
03-26-2007, 08:30 PM
Drag your bike down to a self-serve car wash and blow them off with a high pressure spray gun. Worked well for me.
dizasterzrfun69
03-26-2007, 08:31 PM
Drag your bike down to a self-serve car wash and blow them off with a high pressure spray gun. Worked well for me.


its for my 85 R project im doing. :lol: i dont have them mounted to anything so they would be accross the parking lot by the time i was done. :lol:
sandpuppi101
03-26-2007, 09:48 PM
I use carb cleaner.
250r'en +TCB
03-26-2007, 09:51 PM
new razor blade gets stickers off pro......... wear gloves! lol
sblt500r
03-26-2007, 09:54 PM
fingernails work pretty good!:lol:
Bo0YaA
03-27-2007, 12:12 AM
Ive used WD40 in the past to remove stickers as well
brrcuda
03-27-2007, 05:17 AM
Those maiers are the worst to remove. I wish their fender quality was a good as there sticker quality.

I peel off, use goo-gone to loosen up the glue (never get it all off) and then polish with a plastic polish compound- novus #2. Only process that worked for me. The glue just moves around otherwise.
hadar
03-27-2007, 09:19 AM
I Second WD40.
Liquid-Darkness
03-27-2007, 10:17 AM
its for my 85 R project im doing. :lol: i dont have them mounted to anything so they would be accross the parking lot by the time i was done. :lol:

You could have someone hold em. The water will clean the stickers+glue and not hurt the shine any.:naughty:
dizasterzrfun69
03-27-2007, 10:26 AM
You could have someone hold em. The water will clean the stickers+glue and not hurt the shine any.:naughty:


:wondering nobody trusts me enough to let me shoot a pressure washer in their general direction :rolleyes: I guess i was too much of a prankster when i was little :lol: I guess i'll try the wd 40 someplace where it wont be real noticeable and see how it works.
ceaserthethird
03-27-2007, 10:35 AM
Use a - Heat Gun ;)

Comes Right Off with the Glue !
scooterroo
03-27-2007, 02:53 PM
hairdryer....heat em up, peel em off. and doesnt leave any residue at all.