Not running but nice wheels lol

[Brockey]

Finally broke down my old rims and tires and mounted them on these itps. Then they woundn't bolt up. I had to go to the local used store and got a set of 84
250r hubs for $90 canadian. Sounds expensive to me but I needed them none the less.

http://i123.photobucket.com/albums/o284/Brockey/wheels001.jpg
http://i123.photobucket.com/albums/o284/Brockey/wheels002.jpg


Question. The front axle nut is missing. Anyone know the size nut I need. No big deal I will just take the front axle with me to match it up but just figured I would ask.

Now I gotta start tearing down the motor to replace the connecting rod, crank bearings and seals. Bad part : PO welded the gear shifter on.

[murphysadvocate]

you sure that's a '84. it looks like an '81 to me ( drum brakes) did the previous owner do some frankenstein to it or what?

[200xman]

That is 100% an 81. The drum brake is a dead give away but the frame, tank, swinger etc. are all 81. On a side note the forks are on backwards. The 81 is a trailing axle bike.

[Brockey]

This is an 81 guys. lol. The rear hubs are the only 84 parts on it. But are the front forks reversed?

[200xman]

Here's how the forks are supposed to look.

[Brockey]

Thanks 200xman. I will have to fix that. I was totally unaware of this.

[200xman]

No problem. If you need a rear fender, try Maier. If memory serves me I shopped around and got mine for $90.

[BigGreenMachine]

Looking good! Still selling when its done? Those wheels are nice.

[Liquid-Darkness]

Those rims are clean. Very nice.

[Dirtcrasher]

At least it will roll with style...