PDA

View Full Version : 3 wheelre to 2 wheeler conversion kit


carmacazi
04-26-2003, 04:10 PM
Thereis a photo of an ATC converted to a two wheeler on the atc page with a kit produced by missle engineering, does anyone have any info on the company or the kit, how to get ahold of them??? orany other conversion kits? thanks
Todd
plkmonster2
04-26-2003, 06:35 PM
there was one on ebay a while ago. it was for the 250r. looked like a fat cat
Trikeaholic
04-27-2003, 10:18 AM
http://www.3wheelerworldforums.com/viewtopic.php?p=30186&highlight=#30186


here is an old thread about them, looks like they are still available!
hondaman250r
02-19-2005, 05:50 PM
Im trying to find one of those atc conversion kits to make my 250r trike ride on 2 wheels if u can help email me at leaveit2beaver88@yahoo.com
grundlegrabber
02-19-2005, 07:56 PM
Holic, that link didn't work. Can you post it again? Thanks!
threewheelin-feelin
02-20-2005, 04:44 PM
why would you guys convert a atc250 to a 2wheeler....just get a cr250
raptor
02-20-2005, 05:01 PM
i know the cr250 is similar to the atc 250r. but is the engine the same?
whats different?
hrc85250r
02-20-2005, 06:02 PM
there is almost no similarity between the cr250 and the atc250r....the only similarity is the piston and the stroke of the crank....the cr cylinders also fit the atc, but you have to block the powervalves off, unless you are an ambitious genius like redrider... other than that, nothing is the same. the motors in the 81-84 atc had alot more similarities with the cr of the time than the 85-86's did.....but neither of them shared much in common with the cr tha a few top-end parts....
Trikeaholic
02-20-2005, 07:16 PM
grundle, the guy with the site that goes by "atc250Rlen" or something, I cant find his site anymore actually has a banner ad on his site for the missle type kit. I remember the site was hosted by "homestead" or something. check the links section on the main page. Good luck.
1984kxtTECATE
02-20-2005, 07:17 PM
Thereis a photo of an ATC converted to a two wheeler on the atc page with a kit produced by missle engineering, does anyone have any info on the company or the kit, how to get ahold of them??? orany other conversion kits? thanks
Todd

why would you want to convert?
hondaman250r
02-24-2005, 01:09 AM
i want to switch my 250r trike to 2 wheels so i can ride in wood behind my house they are very naro but i still love rideing on three wheels always will
raptor
02-24-2005, 04:26 AM
get a fat cat? or cr 250