Sprocket Hub Question

[oldsking86]

Alright some of you may have seen my thread in the classifieds for this part for my 86 250r.
If I can't get one there where is a good place to look for one either OEM or aftermarket? Is it a pain in the butt to have pressed on?

[PWK39]

I know you can get one from rpm or lonestar new.I bought a used axle off ebay that was bent for like 20 bucks shipped to my house.I just took the hub off of it.If you go this route take a long piece of schedule 40 2 inch pipe with you to get it pressed off.I think 400ex sprocket hubs will work too.Those hubs are on there real hard.You have to press the hub towards the center of the axle first to expose the snap ring.Once you remove the snap ring you can press the hub off the axle.