Aftermarket intake for 84 250R

[86 Quad R]

i'm needing a larger aftermarket intake for a '84 atc250r and am having a hard time locating one. the only company that i'm aware of is UPP and they dont have them. any suggestions?

thanks in advance.

[SYKO]

WELL if you can run across the factory hondaline 300 kit they had a slightly larger carb so the intake was slightly larger, but thats a rare find

[86 Quad R]

am i going to be forced to fab an aluminum intake for it that i'll have to connect the carb with a rubber hose? :crazy: :crazy:

[TtownJoeShow]

Boyesen Rad Valve!!

[Huffa]

WELL if you can run across the factory hondaline 300 kit they had a slightly larger carb so the intake was slightly larger, but thats a rare find

What makes you say that it uses a larger one? The 300 kits uses the same stock carb as far as I know. :wondering

I might have a larger one, I'll check.

[86 Quad R]

Boyesen Rad Valve!!

no luck there!!!! :(


I might have a larger one, I'll check.

i'd appreciate it :beer

[viper]

if you have 1 and its good just use it ..take the intake you have ( if you have 1 ) and boil it ..take it out or the water , put a glove on and then just work it onto the carb and let it cool on its own ..it will work just fine just make sure its plenty hot so it will stretct and not tear ( never torn 1 ) ..i have done this several times and it works great ...good luck !

[86 Quad R]

yes, i've used that tecnique many, many times on my TRX but, i dont think this will work. i dont know what size the stock carb is for the '84 but, i wanna go to atleast a 34mm and i'm thinking the stock boot wont allow for this. :rolleyes:

[SYKO]

What makes you say that it uses a larger one? The 300 kits uses the same stock carb as far as I know. :wondering

I might have a larger one, I'll check.


negative captain, a true complete 300 kit came with a larger carb setup, most people are unluck enough the the whole setup, mine is original and has the larger carb on it.

[team-red-rider]

u can use an 85-86 250R boyesen rad valve (the 81-86 all have the same intake except for the carb size

[86 Quad R]

thats just it...... i need to retain the original profile of the induction system, including the air box. this machine will see extreme wet conditions and i need to hook things up as they were from the factory. the 85/86 atc and the 86-89 trx intake (oem and other) are all slightly angled to the left and wont lineup as it should. :(

[Huffa]

negative captain, a true complete 300 kit came with a larger carb setup, most people are unluck enough the the whole setup, mine is original and has the larger carb on it.

Negative co pilot :lol:

It did not come with one, here is the parts list right here .......

A Honda mechanic owned mine and he bought a larger carb for mine but for sure it's seperate from the kit.

What size & kind of carb you running ?

[GoodKarma]

Check with these guys:

http://www.mossbargerracing.com/product1.htm#CR125R

I have one that I used when I went to a 34mm, and it fits up great. The one I have actually will allow a larger carb, but it tightens up just fine on my new carb.

[SYKO]

hmmm huffa I fond the thing for the bigger carb in one of the scanned manuals that howdy posted, Im not sure of the actuall size of my carb but I have seen a stock carb and mine is bigger, and since my machine runs top notch I havnt gone diggng around in it to find out its actuall size. AND I AM CAPTAIN! first mate! lol!

[4cylinders]

hey, what about some of the cr250 boots?

[86 Quad R]

Check with these guys:

http://www.mossbargerracing.com/product1.htm#CR125R


thanks GoodKarma. i called them and they have a variation of boot sizes avail that will work for my application. :w00t: