Billy Golightly
03-13-2007, 02:58 PM
This is out of my my Laegers 500R conversion swingarm. I originally thought it was 83-84 250R (because the axle is a narrow one from an early 200x) but, it uses what appears to be an 86+ style 250R brake mounting stay, and it fits perfectly. It is casted, not an after market billet one. Heres the measurements:
Outside diameter where it rides in the swingarm: 79.50mm
Bearing ID for axle: 34.50mm
Carrier width, outside to outside is roughly 6 and 9/16ths inches. My measuring caliper would not open far enough to get a reading for that one.
Outside diameter where it rides in the swingarm: 79.50mm
Bearing ID for axle: 34.50mm
Carrier width, outside to outside is roughly 6 and 9/16ths inches. My measuring caliper would not open far enough to get a reading for that one.