plastic tank leaking..

[dirtbike77]

whats the best product to use on the plastic tank... it has two thin hairline cracks?

[Howdy]

I got a tank off Jeswineheart and it leaked gas also. It looked like there was a crack beside the fuel tube. I looked at it found the gasket on the tube was bad. I re worked the tank and filled it full of gas. It's been 5 days now and not a drop of gas leaking. With any luck that is your problem.


If it is cracked I would use a soldering gun myself and try to melt it together. Be careful not to over do it though.
Howdy

[plkmonster2]

use a plastic welder....yes they make them. use the color of your choice, but make sure that it is the thin plastic, and set the heat pretty high, then apply it. if it is hot enough, it should melt the tank and the plastic together.