PDA

View Full Version : spark problems on a 83' 110



general_lee01
02-17-2007, 06:48 PM
i got a 1983 honda 110 on a trade. it has all new electiric stuff. new stator, cdi, coil, new plug. i was hoping to get it running so i can play in the snow but its not getting any spark. i have some questions. the green ground wire bolts on to the coil mount right, or is there a different ground wire that bolts on to the frame. also could it be the timing causing it not to get spark. any tips or ideas would be helpful.

dufrain
02-17-2007, 07:48 PM
tHAT green wire goes on the coil screw.make sure its clean to bare metal or it wont spark.Check your kill switch and maybe the wiring harness I had a mouse eat one up inside the frame.Check the trigger in the head to see its on the pin right

general_lee01
02-17-2007, 08:20 PM
.Check the trigger in the head to see its on the pin right

is that under the CDI cover on the head?

dufrain
02-17-2007, 08:52 PM
Yeah it is

general_lee01
02-17-2007, 09:18 PM
ok thanks, i will try it tomorrow and hopefully this is the problem. is there any way that u have a pic of the way its suppose to be. or 1 of those microfich things or a link or something.
Thanks again, Later , Collin

general_lee01
02-18-2007, 11:31 AM
tried that this morning, still is not getting spark any other suggestions?
Thanks, Collin

dufrain
02-18-2007, 11:54 AM
only thing left is the wiring harness,a mouse could have gotten to it inside the frame